Any more images or info on this one?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Moved, Liberator II http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=38862 |
Page 1 of 3 |
| Author: | Mr Nick [ Thu Jan 01, 2009 8:10 pm ] |
| Post subject: | |
Any more images or info on this one?
|
|
| Author: | Diggerfreek [ Thu Jan 01, 2009 9:01 pm ] |
| Post subject: | |
I tried to get a hold of mopar, but this is what i got Original Message Follows: ------------------------ US Customer Service - Jeep Brand Site Brief Description: Specifications question Comments: Hello, i am looking for the specifications sheet for the 2008 Liberty - KK Liberator that was on display at SEMA this year. If possible, would you please email me a link or the pdf file? Thank you for your time Dear Nathan: Thank you for contacting the Chrysler Customer Assistance Center regarding your 2008 Jeep Liberty. We have reviewed your recent email and we are glad to provide the build sheet of your Jeep Liberty. In response to your email, we are pleased to provide vehicle build information as per your request. As per our records, your Jeep Liberty (VIN: 8WXXXXXX) was equipped from the factory with the following: it was a dead end 
|
|
| Author: | Pierocksmysocks [ Sat Jan 03, 2009 5:56 pm ] |
| Post subject: | |
Dunno if this helps or not. I've been wanting to do the same to my liberty for a while now. 
|
|
| Author: | Diggerfreek [ Sat Jan 03, 2009 6:18 pm ] |
| Post subject: | |
those ate two of the best pics i have seen so far, but i wish the info sheet was a little bigger and clearer |
|
| Author: | Pierocksmysocks [ Sat Jan 03, 2009 6:24 pm ] |
| Post subject: | |
I just wish they made some of the parts available for us to purchase. Especially parts like the extended fender flares, bumper and radiator skids. |
|
| Author: | Diggerfreek [ Sat Jan 03, 2009 6:28 pm ] |
| Post subject: | |
Pierocksmysocks wrote: I just wish they made some of the parts available for us to purchase. Especially parts like the extended fender flares, bumper and radiator skids.
yeah, I love that hood, but where did you see a rad skid? |
|
| Author: | Mr Nick [ Sat Jan 03, 2009 6:31 pm ] |
| Post subject: | |
I really like the blacked out look, especially how they painted the inside of the headlight housing black. |
|
| Author: | Pierocksmysocks [ Sat Jan 03, 2009 6:32 pm ] |
| Post subject: | |
I've been doing research on the liberator II for a while now trying to find out exactly what all they used. The original silver model they tested had a chopped front bumper and radiator skids. I don't think the red one has it though. Erm. Maybe we ought to start a Liberator II thread since we're getting way off topic heh. |
|
| Author: | Diggerfreek [ Sun Jan 04, 2009 1:32 am ] |
| Post subject: | |
na
|
|
| Author: | jeepxk [ Sun Jan 04, 2009 12:51 pm ] |
| Post subject: | |
I hadn't seen these photos before. I was just thinking last week I wonder what it would look like to paint the fender flares, grill and bumpers matte black like on Wranglers and Cherokee XJ. It looks pretty good. I like the rock rails also. The hood just has matte black tape on it right? |
|
| Author: | Diggerfreek [ Sun Jan 04, 2009 1:08 pm ] |
| Post subject: | |
this was the 2008 sema kk...as far as the hood, I don't think it is tape |
|
| Author: | jeepxk [ Sun Jan 04, 2009 1:21 pm ] |
| Post subject: | |
I think your right, found this picture. http://image.trucktrend.com/f/11582105/ ... or_II+.jpg |
|
| Author: | Boblemoche [ Sun Jan 04, 2009 3:02 pm ] |
| Post subject: | |
I think the fender flares are just the stock one that were chopped |
|
| Author: | Diggerfreek [ Sun Jan 04, 2009 3:18 pm ] |
| Post subject: | |
they look stock also, and un-painted like on the sxt nitro |
|
| Author: | Pierocksmysocks [ Sun Jan 04, 2009 3:46 pm ] |
| Post subject: | |
I'm not sure. They look like they've got a bit more space in there compared to the stock ones. There again it could just be that they're chopped. |
|
| Author: | corwyyn [ Sun Jan 04, 2009 5:00 pm ] |
| Post subject: | |
Diggerfreek wrote: those ate two of the best pics i have seen so far, but i wish the info sheet was a little bigger and clearer
Little bigger, not so clear: 
And here is what I am able to read on the placard: Engine: 3.7L V6 Transmission: Selec-Trac II 4WD system Rear axle: (Actually both axles) Dana 30 open front and Detroit axle 8.25 rear ARB pnuematic rear locker Suspension/Brakes: 2" Superlift suspension system OEM brake system Tires/Wheels: LT295/70x17 (33") BFG M/T T/A tires mounted on custom five-spoke SuperAlloy 17x7.5" rims McGuard spline-drive lug nuts Exterior: Custom SunSet Red Candy and Schott Black w/Argent Metallic paint Mopar tubular ??? (hidden in glare of lights) Performance hood ??? (somehing else hidden in glare) Enlarged flares ORI rock rails Sky Slider roof CP Films red tint EDIT: didn't bother trying to decipher the interior stuff... |
|
| Author: | jeepxk [ Sun Jan 04, 2009 6:41 pm ] |
| Post subject: | |
What is ORI rock rails? Who is ORI? |
|
| Author: | Diggerfreek [ Sun Jan 04, 2009 6:44 pm ] |
| Post subject: | |
there is a place around the US called Off Road Innovations |
|
| Author: | Gimme Liberty [ Sun Jan 04, 2009 6:56 pm ] |
| Post subject: | |
Very nice. I like the look of this a lot. I particularly like the "Created and assembled by enthusiasts for enthusiasts". As opposed to the standard Liberty? 
Anyone have the time/interest/ability to price out the above mods? Christmas may be past, but my birthday is coming up...! |
|
| Author: | Gimme Liberty [ Sun Jan 04, 2009 7:23 pm ] |
| Post subject: | |
A top down shot with a better view of the hood... 
|
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
