Moved, Liberator II

Mr Nick · **Posted:** Thu Jan 01, 2009 8:10 pm

Any more images or info on this one?

Diggerfreek · **Posted:** Thu Jan 01, 2009 9:01 pm

I tried to get a hold of mopar, but this is what i got

Original Message Follows:
------------------------

US Customer Service - Jeep Brand Site
Brief Description:
Specifications question
Comments:
Hello, i am looking for the specifications sheet for the 2008 Liberty -
KK
Liberator that was on display at SEMA this year. If possible, would you
please email me a link or the pdf file? Thank you for your time

Dear Nathan:

Thank you for contacting the Chrysler Customer Assistance Center
regarding your 2008 Jeep Liberty.

We have reviewed your recent email and we are glad to provide the build
sheet of your Jeep Liberty.

In response to your email, we are pleased to provide vehicle build
information as per your request. As per our records, your Jeep Liberty
(VIN: 8WXXXXXX) was equipped from the factory with the following:

it was a dead end

Pierocksmysocks · **Posted:** Sat Jan 03, 2009 5:56 pm

Dunno if this helps or not. I've been wanting to do the same to my liberty for a while now.

Diggerfreek · **Posted:** Sat Jan 03, 2009 6:18 pm

those ate two of the best pics i have seen so far, but i wish the info sheet was a little bigger and clearer

Pierocksmysocks · **Posted:** Sat Jan 03, 2009 6:24 pm

I just wish they made some of the parts available for us to purchase. Especially parts like the extended fender flares, bumper and radiator skids.

Diggerfreek · **Posted:** Sat Jan 03, 2009 6:28 pm

Pierocksmysocks wrote:

I just wish they made some of the parts available for us to purchase. Especially parts like the extended fender flares, bumper and radiator skids.

yeah, I love that hood, but where did you see a rad skid?

Mr Nick · **Posted:** Sat Jan 03, 2009 6:31 pm

I really like the blacked out look, especially how they painted the inside of the headlight housing black.

Pierocksmysocks · **Posted:** Sat Jan 03, 2009 6:32 pm

I've been doing research on the liberator II for a while now trying to find out exactly what all they used. The original silver model they tested had a chopped front bumper and radiator skids. I don't think the red one has it though. Erm. Maybe we ought to start a Liberator II thread since we're getting way off topic heh.

Diggerfreek · **Posted:** Sun Jan 04, 2009 1:32 am

jeepxk · **Posted:** Sun Jan 04, 2009 12:51 pm

I hadn't seen these photos before.
I was just thinking last week I wonder what it would look like to paint the fender flares, grill and bumpers matte black like on Wranglers and Cherokee XJ. It looks pretty good.
I like the rock rails also. The hood just has matte black tape on it right?

Diggerfreek · **Posted:** Sun Jan 04, 2009 1:08 pm

this was the 2008 sema kk...as far as the hood, I don't think it is tape

jeepxk · **Posted:** Sun Jan 04, 2009 1:21 pm

I think your right, found this picture.

http://image.trucktrend.com/f/11582105/ ... or_II+.jpg

Boblemoche · **Posted:** Sun Jan 04, 2009 3:02 pm

I think the fender flares are just the stock one that were chopped

Diggerfreek · **Posted:** Sun Jan 04, 2009 3:18 pm

they look stock also, and un-painted like on the sxt nitro

Pierocksmysocks · **Posted:** Sun Jan 04, 2009 3:46 pm

I'm not sure. They look like they've got a bit more space in there compared to the stock ones. There again it could just be that they're chopped.

corwyyn · **Posted:** Sun Jan 04, 2009 5:00 pm

Diggerfreek wrote:

those ate two of the best pics i have seen so far, but i wish the info sheet was a little bigger and clearer

Little bigger, not so clear:

And here is what I am able to read on the placard:

Engine:
3.7L V6

Transmission:
Selec-Trac II 4WD system

Rear axle: (Actually both axles)
Dana 30 open front and Detroit axle 8.25 rear
ARB pnuematic rear locker

Suspension/Brakes:
2" Superlift suspension system
OEM brake system

Tires/Wheels:
LT295/70x17 (33") BFG M/T T/A tires mounted on custom five-spoke SuperAlloy 17x7.5" rims
McGuard spline-drive lug nuts

Exterior:
Custom SunSet Red Candy and Schott Black w/Argent Metallic paint
Mopar tubular ??? (hidden in glare of lights)
Performance hood ??? (somehing else hidden in glare)
Enlarged flares
ORI rock rails
Sky Slider roof
CP Films red tint

EDIT: didn't bother trying to decipher the interior stuff...

jeepxk · **Posted:** Sun Jan 04, 2009 6:41 pm

What is ORI rock rails? Who is ORI?

Diggerfreek · **Posted:** Sun Jan 04, 2009 6:44 pm

there is a place around the US called Off Road Innovations

Gimme Liberty · **Posted:** Sun Jan 04, 2009 6:56 pm

Very nice. I like the look of this a lot. I particularly like the "Created and assembled by enthusiasts for enthusiasts". As opposed to the standard Liberty?

Anyone have the time/interest/ability to price out the above mods? Christmas may be past, but my birthday is coming up...!

Gimme Liberty · **Posted:** Sun Jan 04, 2009 7:23 pm

A top down shot with a better view of the hood...

Moved, Liberator II

Who is online