door panel removal?

Jeepin_it_real · **Posted:** Fri Jul 10, 2009 10:18 am

any how to's?... its quite difficult to locate the points where the clips are and actually get the panel off... any help would be greatly appreciated

Diggerfreek · **Posted:** Fri Jul 10, 2009 2:03 pm

1. Remove the door handle trim bezel (6).
2. Remove the fastener (5) from the handle area of the front door trim (4).
3. Use a very thin pry tool to remove the cap screw covers (3) from the front door trim (4).
4. Remove the screws (2) from the front door trim (4).
5. Remove the power window switch and disconnect the electrical connector.
6. Disengage the trim panel from the four way locator at the handle area of the trim panel, then carefully remove the door trim panel (4) from the door (1) by lifting upward until removed from the door lock and the mounting attachments on the carrier plate.

Jeepin_it_real · **Posted:** Fri Jul 10, 2009 6:56 pm

thanks digger

Diggerfreek · **Posted:** Fri Jul 10, 2009 7:01 pm

No Prob

Jeepin_it_real · **Posted:** Mon Sep 21, 2009 7:50 pm

hey digger where did you get the picture you posted above/// i wanted to increase the size btut it gets blurry so i bet i can get a better copy to enlarge form the original

Diggerfreek · **Posted:** Mon Sep 21, 2009 8:09 pm

It came from my FSM. I have tried to blow it up, but it can't get any where with it

Mike08Liberty · **Posted:** Mon Sep 21, 2009 8:16 pm

hope this helps ...

Jeepin_it_real · **Posted:** Mon Sep 21, 2009 10:18 pm

indeed it does.. do you have a manual or some kind haha... you always have all these diagrams... where do i get me one of these manuals you got haha

Diggerfreek · **Posted:** Mon Sep 21, 2009 11:41 pm

The Magical FSM (Factory Service Manual)

PM me and we will talk

door panel removal?

Who is online