LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

i know you all want to go higher with you jeep
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=46630		 Page 1 of 4
Author:  Jeepin_it_real [ Tue Sep 22, 2009 8:31 pm ]
Post subject:  i know you all want to go higher with you jeep
but i'm thinking about going lower... any one do this successfully or know where i could start... i know they used to make springs for the nitro anyone kno where i can still get them. i was also gunna do blisteins... any input... especially with my tire/wheel size.... the springs for hte nitro lowered is a whole two inches :shock:
Author:  Diggerfreek [ Tue Sep 22, 2009 8:34 pm ]
Post subject: 
If you want to drop it on it's nutz, that cool :P

Yeah, as far as I know, the eibach lowering kit has seen good reviews
Author:  Jeepin_it_real [ Tue Sep 22, 2009 8:49 pm ]
Post subject: 
with the eibach kit do you think i'll be okay will my wheels/tires?... anyone wanna tell me where o get the shocks :-D
Author:  tjkj2002 [ Tue Sep 22, 2009 8:52 pm ]
Post subject: 
Jeepin_it_real wrote:
with the eibach kit do you think i'll be okay will my wheels/tires?... anyone wanna tell me where o get the shocks :-D
No
Author:  Jeepin_it_real [ Tue Sep 22, 2009 9:13 pm ]
Post subject: 
tjkj care to explain?
Author:  Jeepin_it_real [ Tue Sep 22, 2009 9:23 pm ]
Post subject: 
KK WHEEL NOMINAL SIZE-DIAMETER & WIDTH: 20 x 8.5
Wheel Backspacing: 6.10"
Wheel Offset: 35mm
Wheel Manufacturer: American Racing
Wheel Model: Rogue


KK TIRE SIZE SPEC: 255/45-20
Tire Brand-Model: Yokohoma Parada Spec-X
SUBSEQUENT CLEARANCE: NO RUB
KK Lifted Amount & Type: NONE
Author:  Diggerfreek [ Tue Sep 22, 2009 9:28 pm ]
Post subject: 
Jeepin_it_real wrote:
with the eibach kit do you think i'll be okay will my wheels/tires?... anyone wanna tell me where o get the shocks :-D


F4-BE5-D916-H0 front
F4-BE5-D917-H0 rear

Bilstein claims that stock shock heights will work just fine for lowered rides
Author:  Jeepin_it_real [ Tue Sep 22, 2009 9:34 pm ]
Post subject: 
yeah i saw that a lot of nitro's used them... what do you think about the tire size digger?
Author:  Diggerfreek [ Tue Sep 22, 2009 9:37 pm ]
Post subject: 
meh.... I'm not digging tire numbers right now... Give me a few to see what I can find on tire sizes
Author:  Jeepin_it_real [ Tue Sep 22, 2009 9:40 pm ]
Post subject: 
no biggie no rush haha
Author:  Boblemoche [ Tue Sep 22, 2009 10:24 pm ]
Post subject: 
how can you lower a KK/nitro 2'' when theres less than 2'' between upper a arm and bumpstop at stock height :?
Author:  Jeepin_it_real [ Tue Sep 22, 2009 10:30 pm ]
Post subject: 
its not exactly two inches its like a 1.4" in the front and 1.6" in the back... i dont know but it's been done on the nitro... is the set-up much different?
Author:  Diggerfreek [ Tue Sep 22, 2009 10:39 pm ]
Post subject: 
set up is the same.........

Must come with chopped bump stops :lol:
Author:  Jeepin_it_real [ Tue Sep 22, 2009 10:43 pm ]
Post subject: 
http://www.coolcarpartsonline.com/suspension-trucks-suspension-parts-c-1_132_164/dodge-nitro-3-7l-4-0l-07-09-eibach-pro-kit-lowering-springs-set-of-4-p-22860

here they are... i gotta find out if the bump stops are chopped now... darn more research lol
Author:  Diggerfreek [ Tue Sep 22, 2009 10:46 pm ]
Post subject: 
you FAIL!!!!!!!!!


save some money :wink:
http://www.racinglab.com/eibach-prokit- ... e-011.html
Author:  Jeepin_it_real [ Tue Sep 22, 2009 10:51 pm ]
Post subject: 
haha i was just going off what i found i would have done more research i was more interested in what was in the actual kit lol
Author:  Diggerfreek [ Tue Sep 22, 2009 10:53 pm ]
Post subject: 
Jeepin_it_real wrote:
haha i was just going off what i found i would have done more research i was more interested in what was in the actual kit lol


yeah, found that link on my other fav web site :lol:
Author:  Jeepin_it_real [ Tue Sep 22, 2009 10:54 pm ]
Post subject: 
now the real question is, does the kit come with everything or just springs... cause like mentioned you said i might need chopped stops...
Author:  Diggerfreek [ Tue Sep 22, 2009 10:56 pm ]
Post subject: 
if it didn't come with chopped ones, it would be easy to cut the old ones
Author:  Jeepin_it_real [ Tue Sep 22, 2009 10:58 pm ]
Post subject: 
might just get these too :twisted: ... imma be broke!
Page 1 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/