| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rock Krawler and Boiler shims INSTALLED http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=52456 |
Page 1 of 2 |
| Author: | bigsrturbo [ Tue May 04, 2010 12:53 pm ] |
| Post subject: | Rock Krawler and Boiler shims INSTALLED |
well i finished the lift last night but was too late to take pics so here they are..... before rock krawler with shims installed  after rock krawler with shims  another after shock  it turned out just how i wanted it just a hair higher in the front ........ |
|
| Author: | Cherrie 274 [ Tue May 04, 2010 1:07 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Nice looks like a Jeep is suppose to look.Did you add any rear coil spring isolators? And please let use know what and how much. Thanks. |
|
| Author: | bigsrturbo [ Tue May 04, 2010 1:38 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Cherrie 274 wrote: Nice looks like a Jeep is suppose to look.Did you add any rear coil spring isolators? And please let use know what and how much. Thanks. nope just has the 2inch RK spacers in the back i thought about adding one tho not sure yet |
|
| Author: | DirtyKK [ Tue May 04, 2010 1:43 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
looks good. got any center of wheel to top of fender-well measurements yet? |
|
| Author: | bigsrturbo [ Tue May 04, 2010 1:57 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
DirtyKK wrote: looks good. got any center of wheel to top of fender-well measurements yet? not yet i will go take some and post them up |
|
| Author: | Diggerfreek [ Tue May 04, 2010 5:36 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Looks GREAT!!!! Also, the new image re sizer on the board works really well 
|
|
| Author: | bigsrturbo [ Tue May 04, 2010 5:43 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Diggerfreek wrote: Looks GREAT!!!! Also, the new image re sizer on the board works really well thanks....lol i need to learn how to use that.... |
|
| Author: | Diggerfreek [ Tue May 04, 2010 5:56 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
bigsrturbo wrote: Diggerfreek wrote: Looks GREAT!!!! Also, the new image re sizer on the board works really well thanks....lol i need to learn how to use that.... Hit the edit button and look at what I did to your post. Basically I add this [img].....%20what%20ever[/img] to the URL you posted... The Forum will automatically resize the picture now
|
|
| Author: | bigsrturbo [ Tue May 04, 2010 6:29 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Diggerfreek wrote: bigsrturbo wrote: Diggerfreek wrote: Looks GREAT!!!! Also, the new image re sizer on the board works really well thanks....lol i need to learn how to use that.... Hit the edit button and look at what I did to your post. Basically I add this [img].....%20what%20ever[/img] to the URL you posted... The Forum will automatically resize the picture now ahhhhh ok... now does it post the pic too so u dont have to click on the link to see it? |
|
| Author: | Diggerfreek [ Tue May 04, 2010 6:40 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Yep. As long as you start it with [img] and then insert your url. Then end it with [/img] It will post the picture with out having to click the link........... |
|
| Author: | bigsrturbo [ Tue May 04, 2010 6:42 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
awsome thanks digg... 
|
|
| Author: | Diggerfreek [ Tue May 04, 2010 6:49 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
No problem. Let me know if you have trouble 
|
|
| Author: | WhylmerKK [ Tue May 04, 2010 11:37 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
because it is so high up front? that has installed on part of RK? |
|
| Author: | Diggerfreek [ Tue May 04, 2010 11:49 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
WhylmerKK wrote: because it is so high up front? that has installed on part of RK? It is so high in the front because they add extra spacers in when they did the RK lift... |
|
| Author: | DirtyKK [ Wed May 05, 2010 12:37 am ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
after lookin at it again the front does look considerably taller in the front, maybe you need just one extra iso per side... but if thats the way you want it keep on 
|
|
| Author: | bigsrturbo [ Wed May 05, 2010 2:13 am ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
DirtyKK wrote: after lookin at it again the front does look considerably taller in the front, maybe you need just one extra iso per side... but if thats the way you want it keep on hey dirty dont u have a few extra iso's u were selling ill take them if ur still selling them |
|
| Author: | Scar0 [ Wed May 05, 2010 4:24 am ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
Looks great bigsrturbo!
|
|
| Author: | bigsrturbo [ Wed May 05, 2010 12:29 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
thanks scar0....
|
|
| Author: | Cherrie 274 [ Wed May 05, 2010 1:00 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
bigsrturbo wrote: DirtyKK wrote: after lookin at it again the front does look considerably taller in the front, maybe you need just one extra iso per side... but if thats the way you want it keep on hey dirty dont u have a few extra iso's u were selling ill take them if ur still selling them If he doesn't PM me since I don't know if I'll use the one's I have. |
|
| Author: | WhylmerKK [ Wed May 05, 2010 11:34 pm ] |
| Post subject: | Re: Rock Krawler and Boiler shims INSTALLED |
could you show a photo where rk see and spacer? thanks |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|