is there a mod to keep the fog lights on while high beams are on?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| fog lights and high beams http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=55900 |
Page 1 of 1 |
| Author: | luigi1285 [ Tue Sep 28, 2010 3:09 pm ] |
| Post subject: | fog lights and high beams |
is there a mod to keep the fog lights on while high beams are on?
|
|
| Author: | Neal [ Tue Sep 28, 2010 4:33 pm ] |
| Post subject: | Re: fog lights and high beams |
http://www.jeepkj.com/forumpics/members%20...%20hbeams.pdf |
|
| Author: | cgreen [ Tue Sep 28, 2010 8:44 pm ] |
| Post subject: | Re: fog lights and high beams |
Anyone else having trouble with this link? I'm not getting anything. |
|
| Author: | lefty's pride [ Tue Sep 28, 2010 8:52 pm ] |
| Post subject: | Re: fog lights and high beams |
well if it is the same a a older jeep tj i found that the fog light realy was only used break power when the high beams where on so in that case just take out the relay and jump the lines lights should stay out will you pull them on and stay on with the high beams |
|
| Author: | teckman02 [ Tue Sep 28, 2010 8:53 pm ] |
| Post subject: | Re: fog lights and high beams |
try this http://jeepkj.com/forumpics/members/myjeepwalks/kj_lights_on_highbeams.pdf |
|
| Author: | luigi1285 [ Tue Sep 28, 2010 10:36 pm ] |
| Post subject: | Re: fog lights and high beams |
Has any one done this ? Is it the same procedure between kj and kk? Any ill effects? |
|
| Author: | Diggerfreek [ Tue Sep 28, 2010 10:38 pm ] |
| Post subject: | Re: fog lights and high beams |
I know a few have farted around with the idea of doing this, but I believe that it can not be done because the lights are controlled by the BCM |
|
| Author: | infernicus [ Wed Sep 29, 2010 2:09 am ] |
| Post subject: | Re: fog lights and high beams |
Would it be possible to disconnect the factory fogs from the factory wiring. Then just wire them as if they were aftermarket using the same switch? Maybe? |
|
| Author: | hrogi [ Tue Oct 05, 2010 12:07 pm ] |
| Post subject: | Re: fog lights and high beams |
Ok question... Could there be any issues with heat? I understand that if you are running high beams the fogs lights are really not not needed, BUT having both at the same time durring non fog times would give you more light on the road.... So personaly I am all for it if the wiring and housing can take it... Grammer police stay home... |
|
| Author: | KKeith [ Thu Oct 14, 2010 4:38 am ] |
| Post subject: | Re: fog lights and high beams |
Our Australian spec KKs can have the fog lights on when high beam is on. Yes they do give you more light on the road in non fog conditions when used in conjunction with High Beam. 
|
|
| Author: | Diggerfreek [ Sun Oct 17, 2010 3:51 pm ] |
| Post subject: | Re: fog lights and high beams |
Calling any one with a starscan!!!!!!!!!!! |
|
| Author: | lefty's pride [ Mon Oct 18, 2010 11:06 pm ] |
| Post subject: | Re: fog lights and high beams |
KKeith wrote: Our Australian spec KKs can have the fog lights on when high beam is on. Yes they do give you more light on the road in non fog conditions when used in conjunction with High Beam. hmm what part do i need to buy to get it to do this? or what do i need to turn on in the computer |
|
| Author: | KKeith [ Tue Oct 19, 2010 12:05 am ] |
| Post subject: | Re: fog lights and high beams |
As Digger suggested earlier the light's are controlled by the BCM, hence the need for a Starscan. |
|
| Author: | G.E.Nauticus [ Mon Feb 27, 2012 1:40 pm ] |
| Post subject: | Re: fog lights and high beams |
Thread Resurrection  IIRC whether its controlled by BCM or not, it still requires a mechanical relay hence it can be done. I'm going to play with this project this week and will post my results. |
|
| Author: | Texasrugby911 [ Mon Feb 27, 2012 2:04 pm ] |
| Post subject: | Re: fog lights and high beams |
KKeith wrote: Our Australian spec KKs can have the fog lights on when high beam is on. Yes they do give you more light on the road in non fog conditions when used in conjunction with High Beam. My KK is an American Spec KK and when I push stick thing to turn on my brights temporialiry, the fog lights stay on as well. I'm not sure if this happens to anyone else, but when I really need that extra light, I have to push the stick thing and just hold it. |
|
| Author: | G.E.Nauticus [ Mon Feb 27, 2012 5:17 pm ] |
| Post subject: | Re: fog lights and high beams |
Texasrugby911 wrote: KKeith wrote: Our Australian spec KKs can have the fog lights on when high beam is on. Yes they do give you more light on the road in non fog conditions when used in conjunction with High Beam. My KK is an American Spec KK and when I push stick thing to turn on my brights temporialiry, the fog lights stay on as well. I'm not sure if this happens to anyone else, but when I really need that extra light, I have to push the stick thing and just hold it. I held mine for like 2 minutes and then the HB stopped working all together for like 5 minutes... 
|
|
| Author: | quikgt [ Mon Feb 27, 2012 7:22 pm ] |
| Post subject: | Re: fog lights and high beams |
G.E.Nauticus wrote: I held mine for like 2 minutes and then the HB stopped working all together for like 5 minutes... It does say that this will happen (owners manual). |
|
| Author: | jon153 [ Thu Mar 01, 2012 2:02 am ] |
| Post subject: | Re: fog lights and high beams |
I installed Hella 500 FF's on the front and wired them so they come on with the high beams. No switch needed, you just tap into the high beam wire instead of the low beam wire (like the directions say to do). I then replaced the 55w bulbs with 100w bulbs and there is plenty of light out in front. Cost less than $100 for the entire set up. Also if people driving towards me at night fail to dim their high beams, I can still see fine when I cut mine on. They then usually cut theirs off rather quickly. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|