| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| fabbing swaybar discos http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=57066 |
Page 1 of 1 |
| Author: | DirtyKK [ Tue Nov 23, 2010 4:03 am ] |
| Post subject: | fabbing swaybar discos |
 might have to try fabbing something similar to this with the hiem joints on both sides. wonder how they would work out though. these were built for a 4runner but the way the swaybar moved around the tire would hit hard when the sway was full up and turning the wheel 3/4 of the way. could possibly work on ours though because its quite different. if you couldnt already tell, you basically are leaving the links connected and pulling the center pin to allow them to telescope in and out. |
|
| Author: | DirtyKK [ Tue Nov 23, 2010 4:24 am ] |
| Post subject: | Re: fabbing swaybar discos |
 or something like this would be super easy to fab also. dont mind me just bored at work pondering. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|