Hi, I recently acquired a very low mile 2009 Cherokee CRD, and I'm getting some strange behaviour from the WIF light. So far I have managed to establish that it is not water in the fuel, and that the sensor itself is OK as the warning light behaves the same regardless of whether the sensor is connected. I'm assuming there is a problem in the wiring somewhere. Does anyone have a wiring diagram to show how the WIF sensor is connected on a KK? I have found wiring diagrams for the KK but they don't cover the diesel.

Thanks

_________________
Spudd's Jeep:
2009 Jeep Cherokee Limited CRD Auto
245/70r16 Maxis Bighorns on Tuff Torque steel wheels
PCT Towbar & electrics

This is one I found online:>
Automotive Electricians Portal Wiring diagrams, location of elements, decoding fuses
https://portal-diagnostov.com/en/

Alldata is another very good one, https://www.alldata.com/en

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve