It is currently Thu Oct 16, 2025 9:38 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: 2010 tow hook install question
PostPosted: Sat Jul 23, 2011 4:41 pm 
Offline
LOST Newbie

Joined: Thu May 27, 2010 9:33 am
Posts: 16
Location: Wauconda, IL
I'm trying to install tow hooks on my 2010 and every write up I see looks totally different then what my jeep looks like. How do I remover that plastic piece to get my hand in there? Do I cut it off? Cause I removed the 3 clips on the bottom and tried to pull the whole thing out but it is a massive piece and won't come out without taking the bumper off.

Any help is appreciated. Thanks!

_________________
2010 KK Sport | Charcoal Grey | Tow Hooks
1998 XJ Limited | 4.5 RE | 31 trxus | bunch of other stuff


Top
 Profile  
 
 Post subject: Re: 2010 tow hook install question
PostPosted: Sat Jul 23, 2011 6:48 pm 
Offline
LOST Newbie

Joined: Thu Jun 30, 2011 9:53 pm
Posts: 60
Not sure if this will help, but here is a link to the direction I am using to install my tow bar bracket from Blue OX. It shows how to remove the front bumper cover, maybe it will help you out.
http://www.aemfg.com/pdfs/BX1976.pdf


Top
 Profile  
 
 Post subject: Re: 2010 tow hook install question
PostPosted: Sat Jul 23, 2011 6:51 pm 
Offline
LOST Newbie

Joined: Thu Jun 30, 2011 9:53 pm
Posts: 60
Here is another link to a post here on the forum from a member showing how to do the same thing (install tow brackets) with better photos.
http://www.grossie.net/Michael/Tow_Brackets_Jeep.htm


Top
 Profile  
 
 Post subject: Re: 2010 tow hook install question
PostPosted: Sat Jul 23, 2011 7:01 pm 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
Which hardware set did they give you? If you have the "m" shaped bolts you shouldnt have to remove the bumper. There is another bolt setup that has a flat piece and two studs forming a "u" which you would have to take off the bumper cover for installation. Mine didn't come with any hardware so i bought my own bolts, nuts and washers and fished them through the small opening of the "frame" rail with a coat hanger and string. I only had to pull back the fender flare and unclip those 3 bottom clips on the bumper. It didn't take long but it was a pita.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
 Post subject: Re: 2010 tow hook install question
PostPosted: Sun Jul 24, 2011 7:52 pm 
Offline
LOST Newbie

Joined: Thu May 27, 2010 9:33 am
Posts: 16
Location: Wauconda, IL
The hardware is good, but in all the pictures I see of tow hook installs the plastic piece in front of the trans cooler is taken out and I can't figure out how to pull the piece out. Do I need to cut it? I don't want to take the bumper off.

_________________
2010 KK Sport | Charcoal Grey | Tow Hooks
1998 XJ Limited | 4.5 RE | 31 trxus | bunch of other stuff


Top
 Profile  
 
 Post subject: Re: 2010 tow hook install question
PostPosted: Sun Jul 24, 2011 11:29 pm 
Offline
Lifetime Member & Advertising Vendor
Lifetime Member & Advertising Vendor
User avatar

Joined: Mon Sep 06, 2010 5:52 pm
Posts: 2172
Location: NEVADA
If you are talking about the little square plastic pieces with vents in it then yes, cut it.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS


ATHFAB.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com