LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KK STEEL BUMPER (All done!!)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=64669		 Page 2 of 4
Author:  At The Helm [ Tue Jan 24, 2012 12:19 am ]
Post subject:  Re: KK STEEL BUMPER
I really appreciate the offer Arturs, but i already have my steel in hand and shipping from CA to NJ and back wouldn't be worth it. Did some more cutting today, i need ear plugs :dizzy:
Author:  arturs13 [ Tue Jan 24, 2012 7:54 pm ]
Post subject:  Re: KK STEEL BUMPER
ok i did not know u r from CA :wink: ,anyway you're doing awesome job, can't wait for updates...
Author:  smigelskijk [ Tue Jan 24, 2012 8:13 pm ]
Post subject:  Re: KK STEEL BUMPER
Nice work, can't wait to see updates and final product.
Author:  bily O [ Sat Jan 28, 2012 1:40 pm ]
Post subject:  Re: KK STEEL BUMPER
save your patterns i'll cover the shippin cost for copys, you could save me a crapload of time.
Author:  musclezmarinara [ Sat Jan 28, 2012 9:56 pm ]
Post subject:  Re: KK STEEL BUMPER
+1 to that ^
Author:  At The Helm [ Wed Feb 01, 2012 12:57 am ]
Post subject:  Re: KK STEEL BUMPER
Made some more progress. Got some pieces welded together on the backside. Tomorrow i will fit it up and figure out the mounts, turn signals and rad skid.
Image
Author:  At The Helm [ Wed Feb 01, 2012 1:01 am ]
Post subject:  Re: KK STEEL BUMPER
Also got these in the mail today. The d ring mounts are courtesy of JCR offroad.
Image
Author:  miKKe [ Thu Feb 02, 2012 3:09 pm ]
Post subject:  Re: KK STEEL BUMPER
make that 2 copies of blueprints....please
Author:  mawlkrawler [ Tue Feb 07, 2012 10:29 am ]
Post subject:  Re: KK STEEL BUMPER
Looks great so far. What gauge steel are you using? Also I really love the fab you made. Its really low profile and looks like it would really improve your approach angle.
Author:  At The Helm [ Tue Feb 07, 2012 11:57 am ]
Post subject:  Re: KK STEEL BUMPER
Thanks MK. Its 5/32 plate for the skin and 1/4" x 2" angle for the mounts.
Author:  mawlkrawler [ Tue Feb 07, 2012 2:16 pm ]
Post subject:  Re: KK STEEL BUMPER
Thats some thick stuff. I'm jelous! Def keep us posted with some pics!
Author:  At The Helm [ Tue Feb 07, 2012 5:11 pm ]
Post subject:  Re: KK STEEL BUMPER
Ok, here's how it lays so far. As always bad pics :ROTFL:
Image
Image
Image
Author:  tommudd [ Tue Feb 07, 2012 6:54 pm ]
Post subject:  Re: KK STEEL BUMPER
How are you going to mount it to the KK?
Author:  At The Helm [ Tue Feb 07, 2012 7:58 pm ]
Post subject:  Re: KK STEEL BUMPER
tommudd wrote:
How are you going to mount it to the KK?

The third pic down shows the 2" angle, the holes match the tow hook holes on the frame. I'm going to make a plate that slides into the frame holes w nuts welded to them. I'm doing an extra bolt per side too. I might have 2 more that tie into the crossmember too.
Author:  musclezmarinara [ Wed Feb 08, 2012 12:30 am ]
Post subject:  Re: KK STEEL BUMPER
MUST HAVE BLUEPRINTS :ROTFL:

GREAT WORK MAN!
Author:  At The Helm [ Wed Feb 08, 2012 10:14 pm ]
Post subject:  Re: KK STEEL BUMPER
More pics
Image
Image
This is how the turn sigs will look
Image
Author:  501 [ Wed Feb 08, 2012 10:56 pm ]
Post subject:  Re: KK STEEL BUMPER
Man I wish I could weld! Looking good!
Author:  At The Helm [ Wed Feb 08, 2012 11:06 pm ]
Post subject:  Re: KK STEEL BUMPER
501 wrote:
Man I wish I could weld! Looking good!

So do I. :ROTFL:
Author:  mawlkrawler [ Thu Feb 09, 2012 11:36 am ]
Post subject:  Re: KK STEEL BUMPER
Whats the height from the bottom of your steel bumper to the top? I want to compare it to the stock bumper.
Author:  At The Helm [ Thu Feb 09, 2012 8:45 pm ]
Post subject:  Re: KK STEEL BUMPER
The face is 6". You can't really compare to the stocker though because the plastic bumper slopes downward from the grill. Mines tucks under the grill and sits flat.
Page 2 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/