Hi Folks,

i planned to spend my KK 4 new Wheels Por Comp Steel rims in 7x16 or 8x16.
Did someone have expirience with thess rims?

By the way.. if i install new rims, i also need four new valve and sensors for the TMS, but look at Rockauto and not sure, which one is the correct valve.

Thank you for your help.

Ps: im in my area the only one who drives a KK, and lots of people say Wow, they know about Jeep Cherokee(Liberty) but didnt expect that its this kind of nice looking car.

Regards
Mario

You can take the TMP sensors out of your stock wheels and put them in the new wheels. 16x7 or 16x8 will both work depending on the offset/backspacing.

_________________
Out - 2008 Jeep Liberty Limited 4x4
In - 2011 Jeep Liberty Carbon Edition http://www.cardomain.com/ride/3972889/2 ... ed-edition

Go with a backspacing that youll be able to get some nice clearance on.

_________________
2012 KK Cherokee * Arctic by Musclez * Mineral Gray
- Too Much to list BUILD THREAD

Hi, i couldnt take out the TMP Sensors cause my stock wheels are with winter tyres. My KK is an US Import Model, and the sensors are huge expensive here and not totally clear which sensor and what frequency i have. Maybe someone here knows what kind of sensors i need. Little example.. the Procomp wheels will cost 125€ per wheel..the sensor will cost 105€ per wheel. Thats a little bit nuts i guess.
regards
Mario