LOST JEEPS :: View topic - KK Down Under

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

KK Down Under http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=64722	Page 1 of 2

Author:	btalyor218 [ Tue Jan 17, 2012 6:28 am ]
Post subject:	KK Down Under
Hi Guys, I've been reading your posts on Lost for quite some time now for inspiration. I have some posts on our forum here in Australia (Ausjeepoffroad) and I thought I'd finally post some info on my Jeep on your forums, as I've been very busy modding her over the last 2 years. My jeep remained stock standard, until my first mod - installing a UHF Radio. At that stage, I made a bracket that fitted to the bonnet hinge, and hid the Unit under the steering column with a plug for the hand piece in the centre dash panel. Then I made a roof console. It's constructed out of ply, and I had it professionaly upholstered. It has a DVD Player with Digital TV, External Speaker for the UHF, 3 Switches & Factory Light (with the climate control sensor) Next, came the TJM Alloy front Bar, Which Installed myself. Took 2 days to do, and now has a winch, Roo Lights, and I moved the UHF Antenna onto it. It's been lifted 2.5 Inch's with a CRDSTU lift kit Before After I made a switch mount for the the dash bezel, made out of pressed metal. It has 5 switches, and the UHF Hadset bracket. I've made a custom mount for an ARB Compressor in the engine bay, made out of gal sheet painted black. The last thing I have just completed, was making a set of custom roof rails to mount an ARB Roof Cage to. There are numerous other little mods that could make this post go on for quite a while (extra speakers, Sub, LED Interior Lighting, Power Outlets, Invertor, Lockpick) so I'll hold off on that stuff for now. Ben.T

Author:	Cherrie 274 [ Tue Jan 17, 2012 7:13 am ]
Post subject:	Re: KK Down Under
Awesome, But how did you move the steering wheel.

Author:	Diggerfreek [ Tue Jan 17, 2012 8:30 am ]
Post subject:	Re: KK Down Under
Your KJ TJM still looks awesome! I'm glad to see you made it over there! Cheers, Nathan

Author:	At The Helm [ Tue Jan 17, 2012 10:43 am ]
Post subject:	Re: KK Down Under
That switch bank looks good. Even better is the custom overhead console! Great ideas!

Author:	Jeepin_it_real [ Tue Jan 17, 2012 12:04 pm ]
Post subject:	Re: KK Down Under
I may be steeling that switch bank idea

Author:	zoomie [ Tue Jan 17, 2012 2:47 pm ]
Post subject:	Re: KK Down Under
Very nice work.

Author:	infernicus [ Tue Jan 17, 2012 3:07 pm ]
Post subject:	Re: KK Down Under
Looooooks Awesome!!!!!!!

Author:	Bmxer524 [ Tue Jan 17, 2012 3:36 pm ]
Post subject:	Re: KK Down Under
Very nice. I like the switch bank. My Dad and I were thinking about doing something similar to that actually, but I decided against it because I actually use that space for my sunglasses lol.

Author:	teckman02 [ Tue Jan 17, 2012 3:57 pm ]
Post subject:	Re: KK Down Under
man i like

Author:	hrogi [ Tue Jan 17, 2012 5:10 pm ]
Post subject:	Re: KK Down Under
That is a killer Ride..

Author:	black and blue [ Tue Jan 17, 2012 6:13 pm ]
Post subject:	Re: KK Down Under
awesome where can i find info on the TJM bull bar? im not having much luck with google

Author:	JEEPIN36COKK [ Tue Jan 17, 2012 10:25 pm ]
Post subject:	Re: KK Down Under
This man has got some talent. I dig the front bumper , just saw a TJM add for lights in a JP mag hmmmmm, shipping????

Author:	Mike08Liberty [ Wed Jan 18, 2012 12:55 am ]
Post subject:	Re: KK Down Under
If I remember from a few years back, that bumper is made in the "Down Under" and would cost an arm and a leg to get it shipped to the U.S.

Author:	Diggerfreek [ Wed Jan 18, 2012 8:27 am ]
Post subject:	Re: KK Down Under
As it has already been said, that bumper was made by TJM. Now the bad news. That "bar" was originally made to fit a KJ. About 18 months ago (give or take) TJM cut production due to low demand. At the time btalyor218 got his bar, I think there were only 30 or less bars at dealers in AUS. So at this point, you most likely have better chances winning the lotto than getting a bar.....

Author:	Scar0 [ Thu Jan 19, 2012 6:18 am ]
Post subject:	Re: KK Down Under
Welcome to this side of the pond. Great looking rig you have there. You have been very busy with the Mods. Your rig looks GREAT!

Author:	btalyor218 [ Thu Jan 19, 2012 5:48 pm ]
Post subject:	Re: KK Down Under
Thankyou for all of your comments! Modding the car has become an addiction.... Diggerfreek is very correct - The TJM Bar is no longer produced. Some peckerhead reversed into mine about 4 months ago, (very little damage, but damage none the less) and it had to be repaired because there was no other ones available to replace it. The other guy's insurance company was spewing, because it took 3 weeks to repair, and I had a hire car for the whole time!

Author:	musclezmarinara [ Fri Jan 20, 2012 11:18 am ]
Post subject:	Re: KK Down Under
BUMPER DO WANT ! PLEASE Let me know where you got that TJM doesnt have it on their site must have stateside !

Author:	Jeepin_it_real [ Fri Jan 20, 2012 8:36 pm ]
Post subject:	Re: KK Down Under
musclezmarinara wrote: BUMPER DO WANT ! PLEASE Let me know where you got that TJM doesnt have it on their site must have stateside ! Please.... please please just read the thread

Author:	musclezmarinara [ Sat Jan 21, 2012 2:54 pm ]
Post subject:	Re: KK Down Under
Jeepin_it_real wrote: musclezmarinara wrote: BUMPER DO WANT ! PLEASE Let me know where you got that TJM doesnt have it on their site must have stateside ! Please.... please please just read the thread i read i still want

Author:	Bmxer524 [ Sat Jan 21, 2012 4:20 pm ]
Post subject:	Re: KK Down Under
Diggerfreek wrote: As it has already been said, that bumper was made by TJM. Now the bad news. That "bar" was originally made to fit a KJ. About 18 months ago (give or take) TJM cut production due to low demand. At the time btalyor218 got his bar, I think there were only 30 or less bars at dealers in AUS. So at this point, you most likely have better chances winning the lotto than getting a bar..... Musclezmarinara, as Digger said, they cut production over a year ago and even at the time they were rare. Now that they are out of production it's almost impossible to find one.

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/