I wanted my wife to be able to charge and store her phone in the KK. We bought a device on special for $13 - 4-in-1 Auto Transmitter & Hands-free Holder


The poopy stock lighter socket couldn't support the weight of the device so I did what any Jeep owner on here would do. Tinker!

First step I removed the HVAC/Stereo facia/bezel. It's all one piece. I was leary, reading else where on this forum that you just pull it off. You just carefully pick the top of the outer bezel off with you fingers. I then used a plastic Nair hair removed as a prying tool to get the middle section started. After that it was just a matter of carefully pullling and POP, off it came.

I took the Smartphone holder power plug apart and saw that in the power plug there was a nut that attached the unit to the plug. Perfect for attaching to the HVAC/Stereo facia:


I made a pilot hole in the facia from the back and then bored out the hole with a step drill bit


I then installed the unit to the facia with a lock washer:


Here's what it looked like on the front:


I then soldered the power wires up to a fused lead and piggy spliced into the cigarette light power using screw terminal connectors:


And here is the final product:


I've had it going for about a week now. It works ok but it get's a little bit in the way in 5th gear and it doesn't quite hold up the right angle very well and the design could be improved but for now it's fine.

For High Res images check here: https://picasaweb.google.com/101961286547352112118/InstallSmartphoneHolderInJeepJanuary122012?authuser=0&authkey=Gv1sRgCLe77_PK08GpPg&feat=directlink

_________________
2008 Liberty North 4x4 - 6spd manual - Sky Slider roof - Bright Silver Metallic
Mods: Sky Slider weather stripping fix, Smartphone/MP3 holder/charger/FM transmitter
Future Mods: Mopar skids - high clearance rock bumpers - 2" lift - AT tires

Good job.

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS

ATHFAB.com