High Lift Jack Points

mawlkrawler · **Posted:** Mon Feb 20, 2012 1:43 am

Is there a way to jack up a KK without sliders or steel bumpers? Like some sort of adapter to the high lift jack?

Diggerfreek · **Posted:** Mon Feb 20, 2012 2:08 am

With out sliders, this is as close as your going to get:

http://www.hi-lift.com/accessories/lift-mate.html

or

http://www.4wheelparts.com/Winches-and- ... &t_pl=5839

MALiberty · **Posted:** Tue Feb 21, 2012 4:27 pm

Yup... I used the Hi-Lift on the tire on my Pathy and now my Jeeps... work fine and allows you lift the tire so as to be able to fill in under with whatever....

Diggerfreek · **Posted:** Wed Feb 22, 2012 8:33 am

Just buy sliders, it makes things easier:

ATXKJ · **Posted:** Wed Feb 22, 2012 10:05 pm

phxtoad had done this on KJ's

is there a spot on KK's for the adaptor?

http://www.cardomain.com/ride/683398/2002-jeep-liberty/page-7

Mountainman · **Posted:** Tue Jan 10, 2017 1:19 pm

Diggerfreek wrote:

With out sliders, this is as close as your going to get:

http://www.hi-lift.com/accessories/lift-mate.html

or

http://www.4wheelparts.com/Winches-and- ... &t_pl=5839

Hopefully reviving this old thread. Will the high lift lift mate work well on stock aluminum wheels?

JeepNCrowd · **Posted:** Thu Jan 12, 2017 9:44 pm

Yep works great. And is preferable abs safer than lifting anywhere else. Just carry 1 jack stand with you and slide it under the axle or a-arms after you lift the tire.

Kam08Liberty · **Posted:** Sun Feb 12, 2017 8:59 am

My question would be do I need a high lift jack with 3 inch of lift or my factory Jack can be used with a thick square of wood or what other options are there to lift a lifted liberty? I want to stick with factory jack for now, don't want to get a flat and find out I can't lifted it lol

lfhoward · **Posted:** Sun Feb 12, 2017 1:15 pm

A far cheaper option, which is what i use, is to carry a 8x8x3" block of wood to put under the stock jack. Being 8" square it is stable, and being 3" tall it puts the stock jack back at a height where it will do the job. It has also saved me where I got a flat once on sand, and the block of wood spread the weight out enough to be able to lift the vehicle, instead of cranking the jack down into the sand under the Jeep's weight.

Kam08Liberty · **Posted:** Sun Feb 12, 2017 7:35 pm

lfhoward wrote:

A far cheaper option, which is what i use, is to carry a 8x8x3" block of wood to put under the stock jack. Being 8" square it is stable, and being 3" tall it puts the stock jack back at a height where it will do the job. It has also saved me where I got a flat once on sand, and the block of wood spread the weight out enough to be able to lift the vehicle, instead of cranking the jack down into the sand under the Jeep's weight.

Thanks for reply lfhoward that's what I wanted to hear, so I'll just use a square piece of wood and lift problem solved..

Sent from my SM-N910V using Tapatalk

High Lift Jack Points

Who is online