| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How much fluid goes in the MP1522 transfer case???? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=67377 |
Page 1 of 1 |
| Author: | At The Helm [ Fri May 25, 2012 7:36 pm ] |
| Post subject: | How much fluid goes in the MP1522 transfer case???? |
Today i changed the fluid in my transfer case- about 2 quarts came out. I stopped after about 3.25 quarts and it still wasn't spilling out of the fill hole! Everywhere says it takes approximately 3.8 pints (1.9 quarts) to fill. I stopped because i didn't want to blow any seals or anything. Mp1522 command trac. Truck was level. I'm kinda worried about this, tell me what you guys think. |
|
| Author: | bily O [ Sun Jun 10, 2012 2:59 pm ] |
| Post subject: | Re: How much fluid goes in the MP1522 transfer case???? |
put about 1.75 quarts in my t case, dextron synth atf |
|
| Author: | kiwi_outdoors [ Tue Jun 27, 2023 1:21 pm ] |
| Post subject: | Re: How much fluid goes in the MP1522 transfer case???? |
6/27/2023: I emptied almost 2 qts out of the 2011 Jeep Liberty’s MP1522 transfer case at around 89k miles – likely the original amount filled was 2 qt. So, for a refill use 2 Qts, no NOT fill until the fill port is overflowing. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|