whatdidibreaknow wrote:
For those that installed the Front Plate and the Front Skid plate, there are two slots on the Front Plate where it bolts onto the Front Skid. What bolts did you use? Do they have to be specific ones, or could I just use a standard Gr 5 or Gr 8 bolt with the correct thread?
And on that Front Plate, there are also two holes at the "ends" of the plate - what bolts did you use there? (The Front Plate came with no hardware, and the place I ordered it from isn't responding to my questions...)
Thanks,
Steve
I had leftover bolts from my gas tank skid install that I used to install the front plate (radiator skid). The gas tank skid kit came with new bolts but the old gas tank hanger already had bolts, so thus the extras.
I don't see why a proper grade 8 bolt with a washer wouldn't work in their place.
_________________
2008 Liberty Sport 4x4 Automatic
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof RackM116A3 Trailer build thread: viewtopic.php?f=72&t=77997