Ok so far this is what I have to work with.
Front
Rear
Bumpers to put on
Will update as soon as I actualy start, still figuring how I'm gonna mout stock blinkers so I don't have an extremley ugly gap in my plastic.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Project "New Bumpers" Build Thread http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=69808 |
Page 1 of 1 |
| Author: | daveymurray [ Wed Aug 01, 2012 4:48 pm ] |
| Post subject: | Project "New Bumpers" Build Thread |
Ok so far this is what I have to work with. Front Rear Bumpers to put on Will update as soon as I actualy start, still figuring how I'm gonna mout stock blinkers so I don't have an extremley ugly gap in my plastic. |
|
| Author: | tommudd [ Wed Aug 01, 2012 5:00 pm ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
I'd say it would almost be easier to start from scratch, you'll have to cut off all mounts anyways and then tons of fab work just sayin' |
|
| Author: | At The Helm [ Wed Aug 01, 2012 5:08 pm ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
Are you sure thats the route you want to go? You could trim your stock bumpers for more clearance. Your radiator and ps cooler are going to be really exposed as well as a few other things with those. I agree with Mudd on this one, by the time you get them mounted properly you may as well have started from scratch and have something that will look better. Its your jeep though. |
|
| Author: | daveymurray [ Wed Aug 01, 2012 5:09 pm ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
tommudd wrote: I'd say it would almost be easier to start from scratch, I already have an idea of how I'm mounting bumpers
you'll have to cut off all mounts anyways and then tons of fab work just sayin' |
|
| Author: | daveymurray [ Wed Aug 01, 2012 5:10 pm ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
Atthehelm wrote: Are you sure thats the route you want to go? You could trim your stock bumpers for more clearance. Your radiator and ps cooler are going to be really exposed as well as a few other things with those. as for rad and ps cooler me and a bud are gonna fab skidplate for that.
I agree with Mudd on this one, by the time you get them mounted properly you may as well have started from scratch and have something that will look better. Its your jeep though. |
|
| Author: | tommudd [ Thu Aug 02, 2012 12:41 am ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
Been down this road a few times Using something like the above you'll have to make mounts either way you go, then try and attach what you have to them, sounds easy doesn't it BUT what you are not looking at is the grand scheme of how the KK front and rear are compared to what you have there. Lots of difference, you'll have a LOT of filling in to do to even make it look have way decent Now if you don't care then no problems Just always found that most times its easier to start with a blank slate, then you can build it to the shape of the vehicle Good luck waiting for the outcome |
|
| Author: | bsad67 [ Thu Aug 02, 2012 7:16 am ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
What's with the yellow line instead of a pic? thank you!! I have only seen like two pics on here. |
|
| Author: | DirtyKK [ Thu Aug 02, 2012 10:08 am ] |
| Post subject: | Re: Project "New Bumpers" Build Thread |
Don't put those on your Jeep. They look like a bag of doo doo (I typed the uncensored word FYI) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|