| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2010 Stock wheel specs? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=69821 |
Page 1 of 1 |
| Author: | hollombj [ Thu Aug 02, 2012 8:15 am ] |
| Post subject: | 2010 Stock wheel specs? |
Anyone know the specs. on a 16 in. stock wheel for a 2010 KK?. I want to do a full size spare, need to know hole pattern and width.Hoping something other than a KK specific wheel will fit.They are ridiculously expensive,even used. |
|
| Author: | lfhoward [ Thu Aug 02, 2012 9:00 am ] |
| Post subject: | Re: 2010 Stock wheel specs? |
I don't have the specs just now, but I am using a steel rim from a first generation Liberty as the spare. It has the same backspacing and is the same size (16 inches). It's also significantly cheaper. |
|
| Author: | At The Helm [ Thu Aug 02, 2012 9:08 am ] |
| Post subject: | Re: 2010 Stock wheel specs? |
16x7 5.5" backspacing, 5 x 4.5 holes. |
|
| Author: | hollombj [ Thu Aug 02, 2012 10:45 am ] |
| Post subject: | Re: 2010 Stock wheel specs? |
Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|