LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Odometer reads "error"
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=71955		 Page 1 of 1
Author:  umdterps96 [ Wed Oct 10, 2012 8:41 am ]
Post subject:  Odometer reads "error"
Anyone know how to fix this? They want to charge me $500+ to change out the cluster...any help is appreciated
Author:  Gageraid [ Wed Oct 10, 2012 10:30 am ]
Post subject:  Re: Odometer reads "error"
Sounds fishy to me. Not sure if this would work or if you tried, but disconnect the batter for a few and see if that does anything.
Author:  quikgt [ Sun Oct 14, 2012 2:24 pm ]
Post subject:  Re: Odometer reads "error"
This happened to me after I disconnected the battery to change bulbs. The dealer reflashed it and then it was good.
Author:  Gageraid [ Sun Oct 14, 2012 2:58 pm ]
Post subject:  Re: Odometer reads "error"
quikgt wrote:
This happened to me after I disconnected the battery to change bulbs. The dealer reflashed it and then it was good.

If you have a Hypertech programmer, you can reflash it.
Author:  Ted15 [ Sun Oct 14, 2012 4:15 pm ]
Post subject:  Re: Odometer reads "error"
Where did you get your hypertech programmer. I've checked with every manufacturer I could find a few months ago and they all said they don't make anything for a liberty. I'm curious if you've found one that crosses from another vehicle. :seuss:
Author:  Gageraid [ Sun Oct 14, 2012 4:23 pm ]
Post subject:  Re: Odometer reads "error"
Ted15 wrote:
Where did you get your hypertech programmer. I've checked with every manufacturer I could find a few months ago and they all said they don't make anything for a liberty. I'm curious if you've found one that crosses from another vehicle. :seuss:

Just go on Hypertech's website. They also have a Facebook page that I visit frequently. Excellent customer service and incredible results.
Author:  Ted15 [ Sun Oct 14, 2012 6:34 pm ]
Post subject:  Re: Odometer reads "error"
Gageraid wrote:
Ted15 wrote:
Where did you get your hypertech programmer. I've checked with every manufacturer I could find a few months ago and they all said they don't make anything for a liberty. I'm curious if you've found one that crosses from another vehicle. :seuss:

Just go on Hypertech's website. They also have a Facebook page that I visit frequently. Excellent customer service and incredible results.


Thanks. Were you able to retune the computer? If so, did it relearn everything and go back th the stock tune?
Author:  Gageraid [ Sun Oct 14, 2012 11:44 pm ]
Post subject:  Re: Odometer reads "error"
Ted15 wrote:
Gageraid wrote:
Ted15 wrote:
Where did you get your hypertech programmer. I've checked with every manufacturer I could find a few months ago and they all said they don't make anything for a liberty. I'm curious if you've found one that crosses from another vehicle. :seuss:

Just go on Hypertech's website. They also have a Facebook page that I visit frequently. Excellent customer service and incredible results.


Thanks. Were you able to retune the computer? If so, did it relearn everything and go back th the stock tune?

You should honestly go to their website and read everything. They fully tune the PCM. You can reset it to stock at any time. It DOES NOT relearn the stock tune. The tune is also designed to run with no problems with other mods such as CAI, bigger throttle body, exhaust, gears, different electrical fans, BIGGER TIRES.
I guess I should write a review and post it here soon because I don't see why everyone on this forum doesn't have one. It even reads and clears DTC's. From day one I couldn't stand how unresponsive the Liberty is and this made me so much happier. The sloppy shifts are a thing of the past.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/