I completed this task, so I wanted to share.
Problem: Cruise control very intermittently working. Turning on OR engaging may or may not work. Usually once it didn't work, it usually didn't work again until the car was turned off and back on.
Fix: Cruise control stick (not built into steering wheel) replaced (first time replaced under warrantee, this time by me).
Part: 4671929AC
Prior part numbers: 4671929AA and 4671929AB
Picture of part: Search at
http://www.rockauto.com/dbphp/x,carcode,1502379,parttype,4320,d,2012_RAM_3500_6.7L_L6_DIESEL_Turbocharged_Cruise_Control_Switch.htmlSteps (30 min estimate):
1. Disconnect battery
2. Remove Air Bag (three clips)
(no need to remove any steering column pannels)
(no need to disconnect air bag wires, just let it sit on the sterring wheel)
Diagram:
http://www.rammoparparts.com/oem-part/chrysler/pt-cruiser/2007/gt/2-4l-l4-gas/steering-column/steering-wheel-and-trim/cruise-switch/4671929acVideo:
http://www.youtube.com/watch?v=MMo3_XjCKOE&feature=g-hist3. Remove three screws on old stick
4. Disconnect wire
5. Remove old stick
6. Insert new stick
7. Connect Wire
8. Insert three screws
9. Insert air bag (snap in three clips)
10. Reconnect battery
11. Reconfigure radio stations, etc.