I'll be installing my JBA 2.5 Silver lift on Saturday and can't seem to find any info on whether or not I can do a clevis lift too. I do not want to end up with the forward rake. I realize the JBA is adjustable so I'd be able to get a level rake but I want to get the most lift I can from the adjust-a-struts and still end up level.
So, does has anyone have a JBA 2.5 installed with a few conduit nuts?

I don't see any reasonwhy you would need to. I think you get the same Adjust A Struts as the 4" lift. I'm at around 4" lift and can still go up on the struts. It looks like I could get at least another 4" of lift (8" total) if I adjusted the strut all the way down to maximum (I'm about halfway down now). Now If only the IFS components would allow for it .

_________________
(The worst thing you can do to a Jeep...is never taking it off road.)
'15 WK2 Ecodiesel Overland (My Overland rig)
'11 Green KK Renegade (My Crawler!)
Texans, come join us at Lone Star LOST!
https://www.facebook.com/groups/253493118163702?ref=bookmark&_rdr

The JBA adjust a strut replaces the stock clevis entirely, so there is no way to do a clevis lift with JBA.

_________________
2008 Liberty Sport 4x4 Automatic

Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack
M116A3 Trailer build thread: viewtopic.php?f=72&t=77997

Yes^^^^^^
plus you will be able to crank it up to sit level with the rear if you want or have the rake of stock
Install and then adjust after it settles in some

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Ahh...thanks guys. I'll read the instructions before any more questions.