| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Maniac Manufacturing KK steel front bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=74662 |
Page 1 of 2 |
| Author: | sfixx [ Sun Mar 24, 2013 8:11 pm ] |
| Post subject: | Maniac Manufacturing KK steel front bumper |
New 2010 Renegade owner here. Just picked it up yesterday at a Nissan dealer  The couple traded in their 35k mile, one owner Jeep for a Pathfinder.I found this South African bumper on the web: http://www.maniacmanufacturing.com/products.php Sorry if this is the wrong section to post this. I searched and it doesn't look like it's ever been discussed. It seems pretty rare to find actual pics of fabricated KK bumpers. Can't wait to keeping digging up info about the KK... Steve |
|
| Author: | Gageraid [ Sun Mar 24, 2013 11:52 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
That's an interesting find and nice front bumper for the KK, but on the page I can't find the one for the KK, just the KJ.  .... unless they're the same exact bumper.
|
|
| Author: | WhiteRider [ Mon Mar 25, 2013 1:02 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
There is a pic in the "vehicles" tab of a red "cherokee kk". Looks pretty wicked. Could you grab me one next time your in South Africa? ...shipping on that, could you imagine? |
|
| Author: | Diggerfreek [ Mon Mar 25, 2013 1:41 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Nice looking bumper! WhiteRider is right, shipping would be a killer  .... Unless you could get 20 to 50 people to pay upfront and split shipping. But that is a whole separate nightmare
|
|
| Author: | Ted15 [ Mon Mar 25, 2013 5:48 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
It looks like they've figured out how to make sliders that replace the plastic rocker panel. Looks clean. |
|
| Author: | khalilw [ Mon Mar 25, 2013 10:26 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Look at those flare fenders!!   Where did he got them??? 
|
|
| Author: | Ted15 [ Mon Mar 25, 2013 10:34 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
I feel like I have a forgotten jeep. I like what they've done with that KK, I wish they were closer. Those rock sliders are exactly what I was looking for, provided they actually work. |
|
| Author: | tonycrd [ Mon Mar 25, 2013 10:37 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
khalilw wrote: Look at those flare fenders!! Where did he got them??? Mopar. That's a Commander. |
|
| Author: | khalilw [ Mon Mar 25, 2013 11:08 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
tonycrd wrote: khalilw wrote: Look at those flare fenders!! Where did he got them??? Mopar. That's a Commander. Holy fu**! I deserve to die....
|
|
| Author: | tommudd [ Mon Mar 25, 2013 11:15 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
khalilw wrote: tonycrd wrote: khalilw wrote: Look at those flare fenders!! Where did he got them??? Mopar. That's a Commander. Holy ! I deserve to die.... since it says Commander right on the door in the picture yes you do 
|
|
| Author: | tommudd [ Mon Mar 25, 2013 11:20 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Ted15 wrote: I feel like I have a forgotten jeep. I like what they've done with that KK, I wish they were closer. Those rock sliders are exactly what I was looking for, provided they actually work. I like a rock rail that sticks out more, those wouldn't give you any real protection from trees/ rocks etc from the side, only underneath |
|
| Author: | Gageraid [ Mon Mar 25, 2013 12:05 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Does anyone know about the thing on the fender that looks like a light or a reflector? Does it light up?
|
|
| Author: | tommudd [ Mon Mar 25, 2013 1:39 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Gageraid wrote: Does anyone know about the thing on the fender that looks like a light or a reflector? Does it light up? Yes lights up just like all of the European models have |
|
| Author: | Gageraid [ Mon Mar 25, 2013 1:40 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
tommudd wrote: Gageraid wrote: Does anyone know about the thing on the fender that looks like a light or a reflector? Does it light up? Yes lights up just like all of the European models have Pretty cool. |
|
| Author: | TurboGoKart [ Mon Mar 25, 2013 7:37 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
I'd prefer to order one of Atthehelm's pieces. *still saving my pennies* 
|
|
| Author: | Mikzor [ Mon Mar 25, 2013 11:32 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Uneek4x4 who are an Australian manufacturer are putting a steel front winch bar into production. They just finished the test model and should finish the first production run in a few weeks time. I'm getting one Doesn't really help you guys in the states since shipping would kill but at least it's good to see someone else supporting the KK with goodies.http://www.uneek4x4.com.au/kk-cherokee-bull-bar/ 
|
|
| Author: | Gageraid [ Tue Mar 26, 2013 1:41 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
That looks good. I like the grille guard, too. |
|
| Author: | TIJKK1220 [ Tue Mar 26, 2013 9:38 am ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
Mikzor wrote: Uneek4x4 who are an Australian manufacturer are putting a steel front winch bar into production. They just finished the test model and should finish the first production run in a few weeks time. I'm getting one Doesn't really help you guys in the states since shipping would kill but at least it's good to see someone else supporting the KK with goodies.http://www.uneek4x4.com.au/kk-cherokee-bull-bar/ The shipping for that is fixed at 95 dollars. Just throwing that out there. |
|
| Author: | infernicus [ Tue Mar 26, 2013 6:25 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
TIJKK1220 wrote: The shipping for that is fixed at 95 dollars. Just throwing that out there. Since this company is based in Australia, and has a ".com.au" web address, I think it is safe to assume that it is in AUD, not USD.1850AUD = 1940USD And again, since it is an Australian based company, I'm assuming that $95 is in AUD and that they mean shipping within Australia. Either way, it is a nice bumper. |
|
| Author: | TIJKK1220 [ Tue Mar 26, 2013 11:51 pm ] |
| Post subject: | Re: Maniac Manufacturing KK steel front bumper |
infernicus wrote: TIJKK1220 wrote: The shipping for that is fixed at 95 dollars. Just throwing that out there. Since this company is based in Australia, and has a ".com.au" web address, I think it is safe to assume that it is in AUD, not USD.1850AUD = 1940USD And again, since it is an Australian based company, I'm assuming that $95 is in AUD and that they mean shipping within Australia. Either way, it is a nice bumper. Totally agree it's a nice bumper and you may be right on the AUD. however when you add it to cart you can calculate your shipping cost and it is specific down to state what your shipping would be and it still shows 95 |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|