LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

kk snorkel
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=76571		 Page 1 of 2
Author:  carlosburitica [ Sat Sep 07, 2013 10:21 am ]
Post subject:  kk snorkel
well someone already did one

Image
Author:  Gageraid [ Sat Sep 07, 2013 12:26 pm ]
Post subject:  Re: kk snorkel
carlosburitica wrote:
well someone already did one

Image


Isn't that a CRD?
Author:  At The Helm [ Sat Sep 07, 2013 4:07 pm ]
Post subject:  Re: kk snorkel
Pretty sure it is. I remember this guy fitting a KJ TJM bumper to his KK a while back, he's in Australia.
Author:  teckman02 [ Sat Sep 07, 2013 8:25 pm ]
Post subject:  Re: kk snorkel
looks home made but looks good
Author:  musclezmarinara [ Sat Sep 07, 2013 8:27 pm ]
Post subject:  kk snorkel
Australian crd looks a bit home made
Author:  JeepMorrison [ Sat Sep 07, 2013 11:15 pm ]
Post subject:  Re: kk snorkel
I can bend pvc....but where do you get the top part?

Sent from my Home Phone using Tapatalk
Author:  TIJKK1220 [ Sun Sep 08, 2013 12:24 am ]
Post subject:  Re: kk snorkel
4x4kayak2112 wrote:
I can bend pvc....but where do you get the top part?

Sent from my Home Phone using Tapatalk


ebay.
Author:  JeepMorrison [ Sun Sep 08, 2013 8:37 am ]
Post subject:  Re: kk snorkel
Yep found one on ebay....now trip to home depot!

Sent from my Home Phone using Tapatalk
Author:  Mikzor [ Sun Sep 08, 2013 8:58 am ]
Post subject:  Re: kk snorkel
It's a stainless steel snorkel that's been powdercoated black. They also had to custom make a new airbox for it. It was done by a custom fabrication shop APT fabrications. Also pretty sure his rig is a petrol.

http://www.aptfabrications.com.au/gallery

Image
Author:  musclezmarinara [ Sun Sep 08, 2013 11:01 am ]
Post subject:  kk snorkel
I think and under the fender would be a better solution ... If you ever want to remove it you'll have one gaping whole in the fender :(
Author:  carlosburitica [ Sun Sep 08, 2013 11:29 am ]
Post subject:  Re: kk snorkel
i been searching a lot and have two options for the fabrication

1. is to use a jk rugged ridge XHD top snorkel and get it in next to the wipers, plenty is space and easy go make a hole.
http://www.ebay.com/itm/370857914485?ss ... 1438.l2649

2. you can get it in in the lower side if the fender right were the trail rated sign should go in the passengers side. probles is tat you have to fabricate an S to go around the door, if not it won't open.

plus you need to reverse the airbox the get air from the back and not the front
Author:  JeepMorrison [ Mon Sep 09, 2013 5:48 pm ]
Post subject:  Re: kk snorkel
carlosburitica wrote:
i been searching a lot and have two options for the fabrication

1. is to use a jk rugged ridge XHD top snorkel and get it in next to the wipers, plenty is space and easy go make a hole.
http://www.ebay.com/itm/370857914485?ss ... 1438.l2649

2. you can get it in in the lower side if the fender right were the trail rated sign should go in the passengers side. probles is tat you have to fabricate an S to go around the door, if not it won't open.

plus you need to reverse the airbox the get air from the back and not the front


1. I don't know how that would look....but give it a try.

2. You don't need the s bend. I just mocked one up with it going into the antenna spot. Its a close fit but you can open the door and the hood with just a ~60º bend at the a pillar. I mocked one up with some 3 inch pvc on both my KJ and a buds KK. Looks good just need to get the holes drilled and pipe painted and cap on it.

Sent from my Home Phone using Tapatalk
Author:  Vards [ Sun Sep 29, 2013 7:09 am ]
Post subject:  Re: kk snorkel
I saw a write up in action mag about a modified KK had SFA, cant find it on the net... but it also had a snorkel and I quote "XJ snorkel with minor modifications" It looked great.

Anyone looked into the XJ snorkel to see how it would fit / what would be required?
Author:  carlosburitica [ Sun Sep 29, 2013 9:19 am ]
Post subject:  Re: kk snorkel
xj Goes on the drivers side. I will be difficult to relocate the battery and fuse box
Author:  NoMilk4U [ Tue Jan 19, 2016 1:32 pm ]
Post subject:  Re: kk snorkel
Anyone successful on this endeavor?
Author:  KK Renegade [ Wed Jun 21, 2017 9:05 pm ]
Post subject:  Re: kk snorkel
Bringing this back up. Anybody try a KJ snorkel?
Author:  KKnut [ Sun Jun 25, 2017 10:58 am ]
Post subject:  Re: kk snorkel
Nope, but here is another custom job on FB.
ImageDetails here:

KK snorkel - CRD and V6
https://r.tapatalk.com/shareLink?share_ ... are_type=t


Sent from my iPhone using Tapatalk
Author:  Tman's KK [ Sat Oct 14, 2017 7:57 am ]
Post subject:  Re: kk snorkel
Why couldn't someone make this work?Image

Sent from my SM-G950U using Tapatalk
Author:  lfhoward [ Sat Oct 14, 2017 11:35 am ]
Post subject:  Re: kk snorkel
You’d have to find one that geometrically works. The TJ has more space between the side door and the front fender— compare the TJ pic with the KK pic in the previous post. A snorkel on a KK would have to make a bend and enter the engine compartment above the fender instead of behind it. Also, it would need room to connect to the air box inside the engine compartment. Do you have a pic of a KJ snorkel for comparison?
Author:  TIJKK1220 [ Tue Oct 17, 2017 10:40 am ]
Post subject:  Re: kk snorkel
lfhoward wrote:
You’d have to find one that geometrically works. The TJ has more space between the side door and the front fender— compare the TJ pic with the KK pic in the previous post. A snorkel on a KK would have to make a bend and enter the engine compartment above the fender instead of behind it. Also, it would need room to connect to the air box inside the engine compartment. Do you have a pic of a KJ snorkel for comparison?


I spent some time Sunday installing a Safari Snorkel on a KJ and upon initial inspection... I think it'll fit a kk.

I am not confident enough to buy one just yet considering their price tag ($500) but the lines fit pretty well
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/