Mounting Hardware for 2012 KK Rear Tow Hook

philhavens · **Posted:** Thu Dec 19, 2013 12:11 pm

Hi everyone!

I just bought this tow hook off of eBay. However it came without mounting bolts. Does anyone know what size/type of bolts I can buy that will allow me to connect this to my Jeep?

Thanks!

At The Helm · **Posted:** Thu Dec 19, 2013 12:22 pm

M12x1.75x45 grade 10.9

philhavens · **Posted:** Thu Dec 19, 2013 1:02 pm

Atthehelm wrote:

M12x1.75x45 grade 10.9

Awesome, thanks for the quick reply. Will I need one of those metal clips as well? Or will this just bolt right up to the frame?

EDIT: To answer my own question, you do need a metal clip and 2 of the aforementioned bolts.

Lowes and Home Depot did not have them. I had to go to Grainger. They had them under part number 6AE28. Pack of 10 for about $10. Other speciality/small hardware stores may have them as well.

Now I just need to find one of those metal clips, no clue where to get that.

ajohns1288 · **Posted:** Thu Dec 19, 2013 6:44 pm

philhavens wrote:

Atthehelm wrote:

M12x1.75x45 grade 10.9

Awesome, thanks for the quick reply. Will I need one of those metal clips as well? Or will this just bolt right up to the frame?

EDIT: To answer my own question, you do need a metal clip and 2 of the aforementioned bolts.

Lowes and Home Depot did not have them. I had to go to Grainger. They had them under part number 6AE28. Pack of 10 for about $10. Other speciality/small hardware stores may have them as well.

Now I just need to find one of those metal clips, no clue where to get that.

I think AutoZone or the like might have them for cheaper than the dealer. If not, I believe the Mopar part is: 06504565 (NUT,U Multi Thread )

Mounting Hardware for 2012 KK Rear Tow Hook

Who is online