Hey all....can anyone tell me where the MAP sensor is located on our KK's? I can't find anything with the search feature or even google...

Thanks!

Should be just to the left of your alternator right in the front of the intake manifold

_________________
'08, OME HD/MD coils, Ironman shocks, Al's A-arms, Top plates, ATH front recovery, V-Tec Offroad wheels 17x8.5, Goodyear Wrangler DuraTrac's 265/65R17, Jasper Offroad 12" Dual LED lightbar, Mopar hitch and harness, RRO roof rails and cross bars, Viper throttle body, K&N FIPK, Hypertech Max Energy

I think I found it, its it between the water pump and alt, bolted right to the engine. It appears to be held on with one bolt, and what appears to be a broken bolt on the rh side. Can anyone confirm theirs is actually held on with one or two hex head bolts?

Its just one bolt on the LH side. There is also a locating pin on the RH side

_________________
'08, OME HD/MD coils, Ironman shocks, Al's A-arms, Top plates, ATH front recovery, V-Tec Offroad wheels 17x8.5, Goodyear Wrangler DuraTrac's 265/65R17, Jasper Offroad 12" Dual LED lightbar, Mopar hitch and harness, RRO roof rails and cross bars, Viper throttle body, K&N FIPK, Hypertech Max Energy

thank you so much, so atleast now I know its not a broken stud that could be causing a vacuum leak. I appreciate your help!!!

I tried to remove it once, but didn't feel like trying to hard any taking everything apart.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms