It is currently Thu Oct 09, 2025 4:37 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Performance chip or programmer required for Liberty KK
PostPosted: Fri Dec 20, 2013 4:33 pm 
Offline
LOST Newbie

Joined: Fri Dec 20, 2013 7:03 am
Posts: 2
Can anyone help with suggesting a performance chip for the KK that the stock cpu will not override in a couple of weeks, as I have been reading in several posts. Thanks


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Fri Dec 20, 2013 7:45 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
The Hypertech Max Energy programmer works well for the '08-'10 KK's. The '11-'12 models are not supported yet. Search for Gageraid's posts about the Hypertech or PM him for more info.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Sat Dec 21, 2013 12:59 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
lfhoward wrote:
The Hypertech Max Energy programmer works well for the '08-'10 KK's. The '11-'12 models are not supported yet. Search for Gageraid's posts about the Hypertech or PM him for more info.


X2.
The The Hypertech is all that will work as long as you have the years stated by lfhoward.
You can save money by getting the Econo Hypertech, or splurge on the Max Energy which has some very minor adjustments you can make.
Both kinds of Hypertech will produce 24 horsepower and 24 torque.
Driveability is unbelievably better AND so much more fun.
MPG gains are usually seen.
http://www.hypertech.com/

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Sat Dec 21, 2013 3:07 pm 
Offline
LOST Newbie
User avatar

Joined: Tue Nov 05, 2013 12:29 pm
Posts: 33
Location: Tulsa, OK.
So would you say that the econo helps with the Trans shift problems as good as the max energy model?


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Sat Dec 21, 2013 11:24 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
bwsooner6 wrote:
So would you say that the econo helps with the Trans shift problems as good as the max energy model?


Sent from my iPhone using Tapatalk


Absolutely. It's the same exact tune. The only difference is with the Max Energy you can use a "premium" setting, but then you have to run premium fuel. I just use the regular setting which is the same tune as the Econ version.
The Max Energy allows you to change when the engine cooling fans come on, rev limiter, compensate for different gear ratios, or bigger tires (which I don't think anyone has gotten to work properly yet).
If I could go back, I'd probably just buy the Econ one. I still haven't tried the "premium" setting. One day...

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Sun Dec 22, 2013 11:16 am 
Offline
LOST Newbie

Joined: Fri Dec 20, 2013 7:03 am
Posts: 2
Thank you Guys, I might go with the Max energy model, just because the cooling fans cut in early, with High temperature in the Desert we need to keep the engine cool BEFORE it gets HOT. Plus one day I will probably go for slightly bigger tires.


Top
 Profile  
 
 Post subject: Re: Performance chip or programmer required for Liberty KK
PostPosted: Sun Dec 22, 2013 1:09 pm 
Offline
LOST Addict
User avatar

Joined: Tue Apr 24, 2012 6:00 pm
Posts: 3278
Location: Jersey
Desertfox wrote:
Thank you Guys, I might go with the Max energy model, just because the cooling fans cut in early, with High temperature in the Desert we need to keep the engine cool BEFORE it gets HOT. Plus one day I will probably go for slightly bigger tires.


I'm not sure if they work with the stock fans or not, I've never messed with this feature. You should give them a call and ask them. If it does work for you, that's great!
You'll love the performance, especially if you've driven the stock programming for a while.

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com