No, that was Marlon who did it.
Me.
2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Compatible Shifter Handle/Knobs? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=77877 |
Page 1 of 2 |
| Author: | cherox [ Mon Dec 30, 2013 7:26 pm ] |
| Post subject: | Compatible Shifter Handle/Knobs? |
Hey guys, I am looking to add a more hearty shifter to my KK. I'm not a fan of the fake chrome plastic one that came with it. In both my XJ and ZJ, I had the "t handle" style. It felt much more rugged.. I've seen guys put the rubber JK shifter on, and theres even a Mopar t-shifter (thats way overpriced IMO..) Anyone know if certain other shifters out of Jeeps or Chryslers within a certain age range will fit? For example, will WK2 shifters fit? Theres a nice one on eBay.. What about one off of a 2013 Dodge Ram? Again, a nice deal on eBay.. I vaguely remember reading that someone had put a Durango shift knob in their KK but I don't remember where and I don't recall seeing a picture.. Thanks LOST! |
|
| Author: | Gageraid [ Mon Dec 30, 2013 7:33 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
I believe that was Marlin who did it. There are a few options so hopefully someone else will chime in. |
|
| Author: | mawlkrawler [ Tue Dec 31, 2013 9:56 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
I was gonna do it too. Just haven't found a shifter I like yet. It's a pretty easy process tho. Sent from my iPhone |
|
| Author: | Marlon_JBT [ Tue Dec 31, 2013 1:35 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
No, that was Marlon who did it. Me. 2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using.
|
|
| Author: | Gageraid [ Tue Dec 31, 2013 6:39 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Marlon_JBT wrote: No, that was Marlon who did it. Me. 2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using. Lol my bad. I don't mind our shifter, but I'm sure there are some cooler ones out there. I like that we don't have any sort of button to push down, etc. |
|
| Author: | ajohns1288 [ Tue Dec 31, 2013 9:17 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Marlon_JBT wrote: No, that was Marlon who did it. Me. 2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using. Did you grab one from the line after the last 13WD went by? You should have taken more to share with us.  Can you post some pictures? I might grab one of the WK shifters next time I'm at the dealership. |
|
| Author: | Cherrie 274 [ Tue Dec 31, 2013 9:54 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
I dislike the glare off the chrome, so I might consider these. Thanks Marlon. |
|
| Author: | Marlon_JBT [ Wed Jan 01, 2014 12:24 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
ajohns1288 wrote: Marlon_JBT wrote: No, that was Marlon who did it. Me. 2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using. Did you grab one from the line after the last 13WD went by? You should have taken more to share with us. Can you post some pictures? I might grab one of the WK shifters next time I'm at the dealership. I've been running a Durango shift knob since 2010, dude! Sorry the picture is so blurry, it's actually a grab from a video that I sent to a fellow LOST member. 
|
|
| Author: | Marlon_JBT [ Wed Jan 01, 2014 12:36 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Cherrie 274 wrote: I dislike the glare off the chrome, so I might consider these. Thanks Marlon. Mine wasn't chrome. The Renegade got a "brushed silver" shifter knob and I STILL hated it... As soon as I figured out that the Durango knob would fit I RAN to the dealership to order one! WARNING: It does NOT lock down like the stock KK knob BUT it fits VERY snugly. All you gotta do is remove the old knob by prying down on the lower chrome piece, pulling up, and installing the Durango/WK knob by just sliding it on the shifter polethingy. Twist it around until it settles. |
|
| Author: | mawlkrawler [ Wed Jan 01, 2014 12:14 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
 These were pretty cool. Sent from my iPhone 5 |
|
| Author: | Gageraid [ Wed Jan 01, 2014 6:19 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Marlon_JBT wrote: ajohns1288 wrote: Marlon_JBT wrote: No, that was Marlon who did it. Me. 2011-2013 WK2 shifters will fit, also 2011-2013 Dodge Durango. That is the one I'm using. Did you grab one from the line after the last 13WD went by? You should have taken more to share with us. Can you post some pictures? I might grab one of the WK shifters next time I'm at the dealership. I've been running a Durango shift knob since 2010, dude! Sorry the picture is so blurry, it's actually a grab from a video that I sent to a fellow LOST member. Looks very nice. And I thought I was the only one that uses Neutral. |
|
| Author: | Stang977 [ Thu Jan 02, 2014 7:36 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Quote: These were pretty cool. This is the one that I have. Black w/o the shift pattern 
|
|
| Author: | DREDnot [ Sun Jan 12, 2014 6:33 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Same here...love it 
|
|
| Author: | cherox [ Sun Jan 12, 2014 8:30 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Yeah I wouldn't mind one of those. I just can't find one w/o the shifter pattern OR w/o the "click-in" safety button that we don't need in the KK |
|
| Author: | DREDnot [ Sun Jan 12, 2014 9:20 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Its the drake shift knob for the 11-13 JK auto. P/N JP-181113-BK http://www.drakeautomotivegroup.com/Sto ... px?wid=141 |
|
| Author: | silverkk [ Mon Jan 13, 2014 12:40 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
I'm doing a Heineken beer tap handle Sent from my iPhone using Tapatalk |
|
| Author: | Gageraid [ Mon Jan 13, 2014 9:21 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
silverkk wrote: That'll go over well with an officer if ya get pulled over. 
|
|
| Author: | silverkk [ Mon Jan 20, 2014 2:10 am ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
Your point lol Sent from my iPhone using Tapatalk |
|
| Author: | JeepMonkey190 [ Sun Feb 02, 2014 2:52 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
I working on a new shifter knob idea as I type this but I will leave it a surprise as to what it is until I post a picture of it tonight and it only cost me a few bucks too
|
|
| Author: | nFodzy [ Sun Feb 02, 2014 7:53 pm ] |
| Post subject: | Re: Compatible Shifter Handle/Knobs? |
DREDnot wrote: Same here...love it Any problems with fitting? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|