LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
question about oem ground strap http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=78912 |
Page 1 of 1 |
Author: | Bmxer524 [ Mon Apr 21, 2014 11:47 pm ] |
Post subject: | Re: question about oem ground strap |
How quick do you need an answer? I can run out now and go snap a pic for ya, otherwise I'll wait til the morning(afternoon ![]() |
Author: | Gageraid [ Tue Apr 22, 2014 7:56 am ] |
Post subject: | Re: question about oem ground strap |
![]() Has it been running poorly lately? |
Author: | knightenforcer [ Tue Apr 22, 2014 8:51 am ] |
Post subject: | Re: question about oem ground strap |
Thanks guys. No change in the way she runs...still the same. Bmxer, when u get the chance, K ![]() Been researching that part number, and all it's saying is that it's a chysler/mopar ground strap. I have not found any diagram. Now I know ground straps are usually attached to a chassis or the engine block...I just want to be sure. |
Author: | Bmxer524 [ Tue Apr 22, 2014 1:23 pm ] |
Post subject: | Re: question about oem ground strap |
Best I can do for you. It's down by the firewall... ![]() Here's a shot to show where it goes down: ![]() |
Author: | knightenforcer [ Tue Apr 22, 2014 1:59 pm ] |
Post subject: | Re: question about oem ground strap |
Cool thanks, so it's attached to the engine block at the rear? ![]() |
Author: | Bmxer524 [ Tue Apr 22, 2014 2:21 pm ] |
Post subject: | Re: question about oem ground strap |
I think so. Not gonna lie, the engine was hot and I couldn't really see it. The phone ended up being my eyes. |
Author: | knightenforcer [ Tue Apr 22, 2014 7:01 pm ] |
Post subject: | Re: question about oem ground strap |
Thanks Bmxer! I appreciate the help. I think they forgot to put it on at the factory. (it was just hanging down) The bolt that it goes into, is all the way in the back. I cant even fit my hand in there. lol Using a Fluke multi meter, I could tell the engine block is already grounded. I think this might be an extra ground, as it doesn't seem to affect anything on the KK. I'm still gonna try to attach it or find an alternate location in the engine block. |
Author: | Gageraid [ Tue Apr 22, 2014 11:51 pm ] |
Post subject: | Re: question about oem ground strap |
knightenforcer wrote: Thanks Bmxer! I appreciate the help. I think they forgot to put it on at the factory. (it was just hanging down) The bolt that it goes into, is all the way in the back. I cant even fit my hand in there. lol Using a Fluke multi meter, I could tell the engine block is already grounded. I think this might be an extra ground, as it doesn't seem to affect anything on the KK. I'm still gonna try to attach it or find an alternate location in the engine block. Bmxer beat me to it. I was gonna say it connects by the EGR valve area. If you can just install it somewhere else, the choices are endless. |
Author: | knightenforcer [ Wed Apr 23, 2014 7:47 am ] |
Post subject: | Re: question about oem ground strap |
Thanks Gage Thanks Bmxer ![]() I have it temp hooked up to one of the cylinder head bolt on the d/s. |
Author: | Gageraid [ Wed Apr 23, 2014 11:06 am ] |
Post subject: | Re: question about oem ground strap |
Let us know if anything changes. |
Author: | knightenforcer [ Wed Apr 23, 2014 3:04 pm ] |
Post subject: | Re: question about oem ground strap |
Took it for a drive, So far no change. Everything is the same. Thanks ![]() |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |