| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Strut mount plates (spacers) question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=78982 |
Page 1 of 1 |
| Author: | crippled [ Thu May 01, 2014 1:04 pm ] |
| Post subject: | Strut mount plates (spacers) question |
can you unbolt the strut mount from the body and wedge these guys in there or does the whole strut have to come out when installing these? |
|
| Author: | Bmxer524 [ Thu May 01, 2014 1:18 pm ] |
| Post subject: | Re: Strut mount plates (spacers) question |
As long as you can get the whole assembly down enough to get the plate over the studs you'll be fine. It's more annoying than hard to do. |
|
| Author: | crippled [ Thu May 01, 2014 1:23 pm ] |
| Post subject: | Re: Strut mount plates (spacers) question |
Bmxer524 wrote: As long as you can get the whole assembly down enough to get the plate over the studs you'll be fine. It's more annoying than hard to do. so then it is possible? thats what i am wondering? |
|
| Author: | Bmxer524 [ Thu May 01, 2014 1:40 pm ] |
| Post subject: | Re: Strut mount plates (spacers) question |
Yes, as long as you can get the assembly down far enough to get the plate over the studs. You might have to take the lower clevis bolt out and move the whole assembly down some that way. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|