I cannot seem to find any update posts or how-to's on doing the pinch weld mod. I've found a few topics but all the pictures are deleted from the user. If anyone knows of any it'd be a big help.

Thanks i advance.

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies

Cut back the plastic and hammer the pinch weld towards the engine. Pretty simple

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Also, spray on some black paint or something for corrosion protection. The plastic liner needs to be at least flattened with a heat gun, and ideally welded to itself. Mine was pretty worn when I did it.

_________________
2003 Liberty, ARB bumper w fogs and KC SlimLites
Front Franky II HD, rear OME948 w Rancho RS9000/XL shocks
LT245/75R16C Duratracs on Moabs
4.10 gears, front & rear ARB lockers, Boulder Bars, AFE Stage 2 intake
Surco rack w BajaRack jerry can holder
Cobra 75 WX ST

06 LJ Rubi, 3.5" RE SA and 33" BFG KM2s, GenRight tank

I think some people used to pull the clips and fold the liner back, beat the weld, then fasten the liner again. Then they sat there with a heat gun massaging the plastic back to make more room.

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders

I cut my fender liner out at that height all way across. But I also didnt "just flatten my pinch weld" I beat that thing back. Had to make room for 32.2s with 3.5" lift. Now im at 4" and have plenty of room

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Is the pinch weld the same for KJ and KK's?

If so, I found a good link over on jeepkj.com

See here > http://www.jeepkj.com/forum/f202/how-pound-pinch-welds-stop-fender-rubbing-34295/

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies

Looks the same to me!

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders

Awesome

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies