| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need Help w/ Pinch Weld http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=80308 |
Page 1 of 1 |
| Author: | nFodzy [ Tue Sep 30, 2014 6:27 pm ] |
| Post subject: | Need Help w/ Pinch Weld |
I cannot seem to find any update posts or how-to's on doing the pinch weld mod. I've found a few topics but all the pictures are deleted from the user. If anyone knows of any it'd be a big help. Thanks i advance. |
|
| Author: | JeepMorrison [ Tue Sep 30, 2014 10:29 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
Cut back the plastic and hammer the pinch weld towards the engine. Pretty simple Sent with the power of children's screams!!! |
|
| Author: | Draco [ Tue Sep 30, 2014 10:36 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
Also, spray on some black paint or something for corrosion protection. The plastic liner needs to be at least flattened with a heat gun, and ideally welded to itself. Mine was pretty worn when I did it. |
|
| Author: | Bmxer524 [ Tue Sep 30, 2014 11:00 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
I think some people used to pull the clips and fold the liner back, beat the weld, then fasten the liner again. Then they sat there with a heat gun massaging the plastic back to make more room. |
|
| Author: | JeepMorrison [ Tue Sep 30, 2014 11:52 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
I cut my fender liner out at that height all way across. But I also didnt "just flatten my pinch weld" I beat that thing back. Had to make room for 32.2s with 3.5" lift. Now im at 4" and have plenty of room Sent with the power of children's screams!!! |
|
| Author: | nFodzy [ Wed Oct 01, 2014 7:20 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
Is the pinch weld the same for KJ and KK's? If so, I found a good link over on jeepkj.com See here > http://www.jeepkj.com/forum/f202/how-pound-pinch-welds-stop-fender-rubbing-34295/ |
|
| Author: | Bmxer524 [ Wed Oct 01, 2014 7:23 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
nFodzy wrote: Is the pinch weld the same for KJ and KK's? If so, I found a good link over on jeepkj.com See here > http://www.jeepkj.com/forum/f202/how-pound-pinch-welds-stop-fender-rubbing-34295/ Looks the same to me! |
|
| Author: | nFodzy [ Wed Oct 01, 2014 7:24 pm ] |
| Post subject: | Re: Need Help w/ Pinch Weld |
Bmxer524 wrote: nFodzy wrote: Is the pinch weld the same for KJ and KK's? If so, I found a good link over on jeepkj.com See here > http://www.jeepkj.com/forum/f202/how-pound-pinch-welds-stop-fender-rubbing-34295/ Looks the same to me! Awesome 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|