Need some help with replacing the horns

CollinKK · **Posted:** Fri Oct 24, 2014 8:16 am

Hey everyone,
Recently took the jeep through quite the puddle, and noticed my horns sounded like a clown car all of the sudden. I have replacements, but they are aftermarket. Does anyone have any info or a part number for the stock horns so I can do some digging?

Or maybe someone even knows already if I need to use the included relay, and follow their wiring diagram (which doesn't look like it will fire one horn at a time) or just switch them as if they were stock.

Wasn't looking for anything crazy, just a replacement so I grabbed Hella dual tone TE16 horns.

NAMoulton1 · **Joined:** Tue Aug 12, 2014 7:01 pm **Posts:** 1054

This happens often to me, after a few days the horns will dry out and return to the way they were before.

Here's the basic stuff for the horns that mopar has on their site:

http://www.mopar.com/jeep/liberty/2010/shop/317275/27/3140/

CollinKK · **Posted:** Mon Oct 27, 2014 12:25 pm

Well there sadly was no drying out these guys. When I pulled them out, I literally poured out quite a bit of water.

Luckily the connections to the stock horns are factory spade connectors. It was literally a plug and play switch.

So if anyone in the future is looking to replace their stock horn with something similar if not a bit louder. The model in my first post will work

Need some help with replacing the horns

Who is online