| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Iron Man Lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=81305 |
Page 1 of 1 |
| Author: | oktane17 [ Sat Feb 07, 2015 10:12 pm ] |
| Post subject: | Iron Man Lift |
Is this possible, or is anyone running this; Ironman Struts Ironman Shocks Ironman Front Coil Springs OME Rear Coil Springs Is this going to get a 3 inch lift with top plates and rear spring isolators? Thinking about doing this setup instead. I like the yellow springs and white Shocks and struts. |
|
| Author: | JeepMorrison [ Sat Feb 07, 2015 11:45 pm ] |
| Post subject: | Re: Iron Man Lift |
Sure it will work |
|
| Author: | Bmxer524 [ Sun Feb 08, 2015 3:28 am ] |
| Post subject: | Re: Iron Man Lifts |
Ironman springs sit around 2.25" compared to 2.5" that OME gives. You'll need the 1/4" top plate and might need a small Clevis to get to 3". The rear go with 731 rear springs and 1 extra upper isolator per side. |
|
| Author: | huntb [ Mon Feb 09, 2015 4:46 pm ] |
| Post subject: | Re: Iron Man Lift |
Edit: Never mind (thought he had said Ironman rear springs, not OME) |
|
| Author: | JeepMonkey190 [ Mon Feb 09, 2015 9:46 pm ] |
| Post subject: | Re: Iron Man Lift |
Actually I am running the everything Ironman HD except the rears are JBA 4" springs with only and extra iso in the rear driver side to help with the lean and I sit at about 3 1/2" - 3 3/4" in the front using the top plate and clevis lift, the ride is really nice too |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|