| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LED lighting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=81413 |
Page 1 of 1 |
| Author: | Shaffer [ Mon Feb 23, 2015 10:16 am ] |
| Post subject: | LED lighting |
I am looking into switching all of my dash lights and cluster lights to led's. Has anyone done this yet? I am interested in seeing pics of any and all LED interior lighting and see the ideas that you all have come up with! Lets see em |
|
| Author: | KJWildman [ Mon Feb 23, 2015 10:37 am ] |
| Post subject: | Re: LED lighting |
The dash lights are circuit board mounted on my 02. |
|
| Author: | Shaffer [ Mon Feb 23, 2015 11:02 am ] |
| Post subject: | Re: LED lighting |
KJWildman wrote: The dash lights are circuit board mounted on my 02. im afraid thats mine too. havent looked much into it yet |
|
| Author: | PALiftedKK [ Mon Feb 23, 2015 11:08 am ] |
| Post subject: | Re: LED lighting |
the lights are led factory, but are a direct solderd light. they lay flat on the pcb, not a standing up led. its a fairly easy mod, but to have the patience to do over 10 lights if your doing the whole pcb, props to you because you need 100% precision. kip kay did a mod like this on hi jeep last year. https://www.youtube.com/watch?v=J5njHRCSOAg |
|
| Author: | JeepMonkey190 [ Mon Feb 23, 2015 12:42 pm ] |
| Post subject: | Re: LED lighting |
PALiftedKK wrote: the lights are led factory, but are a direct solderd light. they lay flat on the pcb, not a standing up led. its a fairly easy mod, but to have the patience to do over 10 lights if your doing the whole pcb, props to you because you need 100% precision. kip kay did a mod like this on hi jeep last year. https://www.youtube.com/watch?v=J5njHRCSOAg I should have done this when I had my ddash cluster out of my jeep lol |
|
| Author: | NAMoulton1 [ Mon Feb 23, 2015 2:08 pm ] |
| Post subject: | Re: LED lighting |
PALiftedKK wrote: the lights are led factory, but are a direct solderd light. they lay flat on the pcb, not a standing up led. its a fairly easy mod, but to have the patience to do over 10 lights if your doing the whole pcb, props to you because you need 100% precision. kip kay did a mod like this on hi jeep last year. https://www.youtube.com/watch?v=J5njHRCSOAg Haha, that's a fact...there's a guy locally who flush mounted the face of a CB on his overhead and soldered jumpers from the face to the circuit board somewhere inside the dash. It was 87 soldered connections and over 50 hours of work. |
|
| Author: | PALiftedKK [ Mon Feb 23, 2015 4:12 pm ] |
| Post subject: | Re: LED lighting |
"crazy" |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|