LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

JBA 2.50" KK Lift Kit Jeep Liberty
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=81444		 Page 1 of 3
Author:  MightyMike [ Fri Feb 27, 2015 10:15 am ]
Post subject:  JBA 2.50" KK Lift Kit Jeep Liberty
Just wondering if anyone has installed the JBA lift kit on the KK? It involves removing the sheet metal above and below the A-arm mounting pockets and both me and the mechanic are a bit worried about this! I emailed Marlin about this and he assured me that there was nothing to be concerned of as he had his 2002 KJ modified since 2007 and is still up and running safely. I appreciate Marlin quick response and would like to hear if anyone of you have done the same modification.

Thanks.
Author:  DirtyKK [ Fri Feb 27, 2015 10:48 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
I chose to leave mine and let the A arms open the pocket themselves. I think this is the route most people take.
Author:  Bmxer524 [ Fri Feb 27, 2015 12:42 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Some self clearance. I cut mine. More in the front pocket than the rear. The rear was harder to cut, so I did a little and let the rest self clearance.
Author:  Gageraid [ Fri Feb 27, 2015 12:43 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Bmxer524 wrote:
Some self clearance. I cut mine. More in the front pocket than the rear. The rear was harder to cut, so I did a little and let the rest self clearance.


How loud are they when they "self clear" from driving? I'd imagine some nasty sounds.
Author:  JeepMorrison [ Fri Feb 27, 2015 2:59 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
I didnt even notice mine when they "self cleared" just looked one day and boom it was done
Author:  tommudd [ Fri Feb 27, 2015 5:49 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Gageraid wrote:
Bmxer524 wrote:
Some self clearance. I cut mine. More in the front pocket than the rear. The rear was harder to cut, so I did a little and let the rest self clearance.


How loud are they when they "self clear" from driving? I'd imagine some nasty sounds.


Not loud at all, part of the ones we lifted here were cut, some were not
Author:  tommudd [ Fri Feb 27, 2015 5:53 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
MightyMike wrote:
Just wondering if anyone has installed the JBA lift kit on the KK? It involves removing the sheet metal above and below the A-arm mounting pockets and both me and the mechanic are a bit worried about this! I emailed Marlin about this and he assured me that there was nothing to be concerned of as he had his 2002 KJ modified since 2007 and is still up and running safely. I appreciate Marlin quick response and would like to hear if anyone of you have done the same modification.

Thanks.



Over 160,000 miles running JBA UCAs , (194,000 lifted miles) I cut them out on mine and no issues at all. We've installed 16-17 sets here at my place sets cut some, others were left and no difference at all
Author:  Scar0 [ Sat Feb 28, 2015 12:16 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
I cut my pockets, self-etching primer and rattle can paint. It keeps the paint on the A-arms intact that way. You do not have to cut below the actual pocket bottom, so structurally there is no real difference.
viewtopic.php?f=104&t=41880
PDF 1 Pic 25-26. See post 2 on things I would have done differently.
Since that install I have done the Adjust-A-Strut 2.5. It is a little easier install because the strut does not need to be taken apart.
Author:  MightyMike [ Sat Feb 28, 2015 4:08 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Thank you all for the inputs. Should start installing the kits soon! :BANANA: :pepper:
Author:  Scar0 [ Sat Feb 28, 2015 9:22 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
To get you in the ball park with the Adjust-A-Strut. I used 1-3/4” (1.75") from the top
thread, down to the top of the first spanner nut, to get me at 2.5" lift.
After is settles in its easy to move the nuts up/down to set it again. Be sure you measure from the bottom of the front flair to the center of the wheel before you start, that way you will know where you sit after it is done.
Author:  MightyMike [ Sun Mar 01, 2015 6:18 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Scar0 wrote:
To get you in the ball park with the Adjust-A-Strut. I used 1-3/4” (1.75") from the top
thread, down to the top of the first spanner nut, to get me at 2.5" lift.
After is settles in its easy to move the nuts up/down to set it again. Be sure you measure from the bottom of the front flair to the center of the wheel before you start, that way you will know where you sit after it is done.



Thanks for the tips!
Author:  Scar0 [ Mon Mar 02, 2015 3:26 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Your welcome. Looking forward to the after Pics! 8)
Author:  MightyMike [ Thu Mar 05, 2015 11:56 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Here we go folks!

BEFORE
Image

AFTER
Image

FRONT
Image

REAR
Image

I didn't bother to cut the metal, will probably try to wrap a thick rubber over the arms so when they hit the wall, it'd protect the paint on the arms!
Author:  tommudd [ Thu Mar 05, 2015 12:19 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
MightyMike wrote:
Here we go folks!

BEFORE
Image

AFTER
Image


Not showing up for me. Use Photobucket etc and then post on here
Author:  DREDnot [ Fri Mar 06, 2015 4:57 am ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
I just gave a few taps with a ball peen hammer. Not very elegant, I know.

Image

Image
Author:  Bmxer524 [ Fri Mar 06, 2015 2:11 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
:shock: You have the fancy new adjust-a-struts. Jealousy is kicking in.....

Btw the front looks low. What are you measuring from center of hub to fender? Might need to crank it up a bit more. The front is the same as the 4" kit, so if you wanted you can adjust up to 4" of lift.
Author:  12KK SFD [ Fri Mar 06, 2015 2:33 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Looks great! I like the look for the coils and the arms together.
Author:  MightyMike [ Fri Mar 06, 2015 4:13 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
Bmxer524 wrote:
:shock: You have the fancy new adjust-a-struts. Jealousy is kicking in.....

Btw the front looks low. What are you measuring from center of hub to fender? Might need to crank it up a bit more. The front is the same as the 4" kit, so if you wanted you can adjust up to 4" of lift.


Really? I didn't know that is the NEW one!

The front is just under 2.5" and I will increase it maybe to 2.75" later. 4" is a bit too much I reckon.
Author:  MightyMike [ Fri Mar 06, 2015 4:14 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
12KK SFD wrote:
Looks great! I like the look for the coils and the arms together.


Thanks, I like it too! :mrgreen:
Author:  MightyMike [ Fri Mar 06, 2015 4:14 pm ]
Post subject:  Re: JBA 2.50" KK Lift Kit Jeep Liberty
DREDnot wrote:
I just gave a few taps with a ball peen hammer. Not very elegant, I know.

Image

Image


Your car is sooooo clean!
Page 1 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/