| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What am I up to today? :LOG: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=81679 |
Page 10 of 17 |
| Author: | KJ/toy [ Wed Oct 14, 2015 12:14 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
PALiftedKK wrote: Invented at least 20 new words to the English dictionary this afternoon. I'll take a picture of the bumper tomorrow in daylight. The dark marks is wet paint. I already have plans for the rear. I just don't have time this week to complete the tasks.   Looking good...... |
|
| Author: | At The Helm [ Wed Oct 14, 2015 12:34 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
lfhoward wrote: Sweet AtTheHelm bumper! Are the welded-in receiver hitch and the ATH cutout custom touches requested by you, or is that how ATH is making them these days? The cutout letters and non recessed center were both requested changes.. The integrated receiver is one of the normal options 
|
|
| Author: | PALiftedKK [ Wed Oct 14, 2015 5:58 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
here's a shot of her but from today. touched up the paint a little and cut the fenders. painted behind the bumper where "ATH" is my camo tan color to make it stand out more. 
|
|
| Author: | PALiftedKK [ Thu Oct 15, 2015 8:18 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Painted, cut, drilled, broke, checked oil level type day. What's next? 
|
|
| Author: | lfhoward [ Thu Oct 15, 2015 8:48 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Fascia for an LED pod for your bumper? |
|
| Author: | PALiftedKK [ Sun Oct 18, 2015 7:17 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Lauren,  ill post a few pictures of the bumper when its not so dark out. she's a muddy beast... |
|
| Author: | PALiftedKK [ Thu Oct 22, 2015 5:44 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
In the past week, here's what was completed: Topped rear diff off Installed rear backup lights Off roaded at Rausch Saved a water boarded 3.8l Was forced to remove door side skirt trim Installed trailer harness (4 pin) Issues still present: Saggy rear Possibly shot ball joints Cabin monitor (TV) is still shorting out the battery banks Rear short arm "brackets" were slightly damaged at Rausch. Won't be an issue till upgraded arms Yet to verify front diff level Issues to be fixed within the month: Rear springs. (NAMoulton1) Ball joints Monitor isolation from battery banks Also, washed the kk today, seems to be an issue with jeep owners leaving their doors open when washing... 
|
|
| Author: | PALiftedKK [ Mon Oct 26, 2015 6:59 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
PALiftedKK wrote: In the past week, here's what was completed: Topped rear diff off Installed rear backup lights Off roaded at Rausch Saved a water boarded 3.8l Was forced to remove door side skirt trim Installed trailer harness (4 pin) Issues still present: Saggy rear Possibly shot ball joints Cabin monitor (TV) is still shorting out the battery banks Rear short arm "brackets" were slightly damaged at Rausch. Won't be an issue till upgraded arms Yet to verify front diff level Issues to be fixed within the month: Rear springs. (NAMoulton1) Ball joints Monitor isolation from battery banks front diff level was acceptable, no leaks but added some oil. front rattling was solved, didn't think a loose bolt on the sway bar end link would have made that much noise... set back a little further for the rear springs. haven't bought the shocks yet... got a promotion today, so that makes jeep parts easier to buy  also, for those that may need to replace jba uca ball joints, total install time from start to finish wasn't even an hour. |
|
| Author: | Gageraid [ Mon Oct 26, 2015 10:56 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
You replaced th JBA upper ball joints already? |
|
| Author: | Bmxer524 [ Tue Oct 27, 2015 1:55 am ] |
| Post subject: | Re: What am I up to today? :LOG: |
Gageraid wrote: You replaced th JBA upper ball joints already? I have too, only about 25k on them too. Btw, be happy your ball joints were easy to replace. Mine didn't take too long, but I snapped every bolt on the passenger side... |
|
| Author: | PALiftedKK [ Wed Oct 28, 2015 6:53 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
rear springs are really shot now... bump stops are about an inch from touching the axle (spacer plate). im going to order shocks this weekend and should have time next week for install. im half way to having a full lift... not where its needed, but rear (believe it or not) is worse then the front. shocks haven't blown a seal yet but the rear is sooo sloppy when driving down the road over 45 mph. |
|
| Author: | Bmxer524 [ Wed Oct 28, 2015 11:57 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
I'd honestly just save installing the shocks until you get new springs. That way you aren't overworking new shocks. |
|
| Author: | JeepMorrison [ Thu Oct 29, 2015 1:29 am ] |
| Post subject: | Re: What am I up to today? :LOG: |
Bmxer524 wrote: I'd honestly just save installing the shocks until you get new springs. That way you aren't overworking new shocks. X2 Sent from my SM-N900P using Tapatalk |
|
| Author: | NAMoulton1 [ Thu Oct 29, 2015 10:48 am ] |
| Post subject: | Re: What am I up to today? :LOG: |
BMXer, 4x4kayak, PA does have new (used) springs. They're just not installed yet haha. |
|
| Author: | PALiftedKK [ Sat Oct 31, 2015 11:52 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
detailed the KK today. needed to because ice on the windshield is nuts till it comes off... spray painted the bumper, looks brand new again. Thanks Rausch... also spray painted where the rocker trim is. some what major rust on the passenger side. shes looking good!!! its a Saturday night... 
|
|
| Author: | PALiftedKK [ Tue Nov 03, 2015 7:11 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Cut 1/4" off the bumper where it touches the resonator, it still rattles though it's cleared... When I drive to work tomorrow I'll listen if it still rattles. As bad as it was. I cut it using my solar pannel fed inverter. Performed flawlessly. Still on hold with the shocks... Marlin is out this week so I'll have to wait... Buying from him is faster then buying from Amazon shockingly. If bought from amazon I'd get the bilstien 5100 series; something like 4565 model. 15" collapsed, 25" (i believe) extended. |
|
| Author: | Gageraid [ Tue Nov 03, 2015 7:15 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Do you think it's the bumper or resonator that is rattling? |
|
| Author: | PALiftedKK [ Tue Nov 03, 2015 7:17 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
Gageraid wrote: Do you think it's the bumper or resonator that is rattling? it's both. The bumper frame was to low there for was touching the resonator. I have no plans of removing the resonator too. I like a fart can free jeep. Though I'm on the edge with removing the muffler and scooting the resonator in it's place. |
|
| Author: | PALiftedKK [ Sat Nov 07, 2015 3:18 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
in the process of buying a few engine parts. nothing is broken, just improving upon. should have some of the parts in hand this week to mock up. but wont be able to be installed after a few certain maintenance items are addressed. in the mean time, i fixed my media server in the jeep... i isolated the monitor from the system. painted the body under the doors where the plastic trim used to be. did a front tire alignment and tire rotation. ill do a 4 tire alignment once the rear springs are installed. debating on buying a JBA or Ricky's track bar this year. found out why it reeks in the jeep too... half my d30 bottle fel over in the side bin in the back and soaked the sound deadning mat... ill stick with the stench till it gets warmer. that includes ripping out all of the rear... not excited also cut more off the bumper closest to the resonator. the resonator clears the bumper by more then a 1/4" and still vibrates. i can not take off any more. so im at the point of moving the resonator down stream and "upgrading" the exhaust. i want to keep the resonator for silence due to the muffler i plan on getting. i need as much back pressure as possible, knowing the resonator doesnt really offer much back pressure... but its something. |
|
| Author: | PALiftedKK [ Sun Nov 08, 2015 8:17 pm ] |
| Post subject: | Re: What am I up to today? :LOG: |
sooo, you know me... always busy... I should have time to pick up shocks this week... I have 2 assignments due Monday night, 5 tests Tuesday, an essay due Thursday and i just finished up 6 assignments due today... on top of a full time job... ill be lucky if the rear gets done this week...  inspection is this month. hope engine isn't running too rich. I definitely wont disconnect the battery till after inspection! wish me luck I guess.
|
|
| Page 10 of 17 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|