2" spacer lifts? Did not want spend a lot of money right now any ideas

Dont do it ruins you suspension. Go with a lift from jeeping by al

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik

I used a 3.5" rock krawler lift for a while before getting the JBA kit. Replace the supplied grade 5 hardware with grade 8 from Ace Hardware(unless they ship it with grade 8 now). You'll want Teraflex front bump stops and longer rear shocks at the very least. You'll be no different then people with spacers and clevis lifts for that extra 1/2" lift on their OME kits and it's 10x easier to install. Although you should replace all the shocks, at this point its almost worth saving more and just getting the springs too.

Save up and do it right one time instead of wasting money and just have to do it over again
If you can't wait a few months ( if it takes that long to save for a real lift) then you have a problem

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Plus, spacers ride really harsh and if your springs are already shot (sagging) it just makes it look weird and handle odd.

Save up the money, and buy a full spring lift.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15
ATS42rle