So I ordered the struts and springs which I think are 1.5 lift each also a .5 Clevis spacer


No do I need to buy his spring isolators or do I use my factory ones ..
Also are his strut spacers for strength or more lift

Anything else I missed let me know please and thanks

Ironman springs will give you 2.25" lift or there about. Plus the .5" clevis spacer you will have 3.25" lift. Better be looking at the JBA arms at that point before you go any taller.

Re use your factory isolators

Strut spacer plates go ontop of the coilover assembly and gives extra 1/2".

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

I'm looking to pre assemble my struts myself so I need 4 isolators the two strut mounts ... But what about the rubber bushings inside do the come with the strut

You use everything that is on your old unit except for the spring and shock. Easy as pie. But id let a shop do it for you.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

I understand that .... I'm trying to not disassemble my stock struts ...
It would just be easier for a shop to install and I'd like it alllll new

The new top plates will include the rubber bushings for the shock rod..

_________________
2010 KK 4WD BRILLIANT BLACK
Fox/King/Bilstein ATH BUMPERS ATH RACK GY DURATRACS

ATHFAB.com

Perfect ath ... And then all I would neeed is the 4 isolaturs

If you buy new top mounting plates they should come with isolators
so you would only be buying one extra isolator perside for the bottom
Again as suggested allow a shop to compress the springs and put everything together
Ironman coils are very close together for one and the fingers of those cheap compressors do not fit well

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited