| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Jba ironman front struts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=82212 |
Page 1 of 1 |
| Author: | Gixxa [ Sat May 23, 2015 11:15 pm ] |
| Post subject: | Jba ironman front struts |
So I ordered the struts and springs which I think are 1.5 lift each also a .5 Clevis spacer No do I need to buy his spring isolators or do I use my factory ones .. Also are his strut spacers for strength or more lift Anything else I missed let me know please and thanks |
|
| Author: | JeepMorrison [ Sat May 23, 2015 11:30 pm ] |
| Post subject: | Re: Jba ironman front struts |
Ironman springs will give you 2.25" lift or there about. Plus the .5" clevis spacer you will have 3.25" lift. Better be looking at the JBA arms at that point before you go any taller. Re use your factory isolators Strut spacer plates go ontop of the coilover assembly and gives extra 1/2". |
|
| Author: | Gixxa [ Sun May 24, 2015 12:02 am ] |
| Post subject: | Re: Jba ironman front struts |
I'm looking to pre assemble my struts myself so I need 4 isolators the two strut mounts ... But what about the rubber bushings inside do the come with the strut |
|
| Author: | JeepMorrison [ Sun May 24, 2015 12:06 am ] |
| Post subject: | Re: Jba ironman front struts |
You use everything that is on your old unit except for the spring and shock. Easy as pie. But id let a shop do it for you. |
|
| Author: | Gixxa [ Sun May 24, 2015 12:14 am ] |
| Post subject: | Re: Jba ironman front struts |
I understand that .... I'm trying to not disassemble my stock struts ... It would just be easier for a shop to install and I'd like it alllll new |
|
| Author: | At The Helm [ Sun May 24, 2015 12:33 am ] |
| Post subject: | Re: Jba ironman front struts |
The new top plates will include the rubber bushings for the shock rod.. |
|
| Author: | Gixxa [ Sun May 24, 2015 1:09 am ] |
| Post subject: | Re: Jba ironman front struts |
Perfect ath ... And then all I would neeed is the 4 isolaturs |
|
| Author: | tommudd [ Sun May 24, 2015 1:40 am ] |
| Post subject: | Re: Jba ironman front struts |
If you buy new top mounting plates they should come with isolators so you would only be buying one extra isolator perside for the bottom Again as suggested allow a shop to compress the springs and put everything together Ironman coils are very close together for one and the fingers of those cheap compressors do not fit well |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|