It is currently Mon Oct 20, 2025 6:33 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
crippled
 Post subject: Cone or ball seat lug nuts?
PostPosted: Thu May 15, 2014 9:28 am 
Offline
LOST Member

Joined: Sun Feb 24, 2013 11:20 pm
Posts: 284
Just got a set of 16x8 MOABS in black from Quadratec, feels like the lug holes are for cone seat lugs but i think the stocks are ball seat like all other vehicles......is this correct? do I need new lug nuts?
Top
 Profile  
 
tjkj2002
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Thu May 15, 2014 10:44 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Stock is cone seat.Honda is one of the only ones I know of that uses ball seat.
Top
 Profile  
 
crippled
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Thu May 15, 2014 10:58 am 
Offline
LOST Member

Joined: Sun Feb 24, 2013 11:20 pm
Posts: 284
thank you sir
Top
 Profile  
 
KJ/toy
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Thu May 15, 2014 5:10 pm 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
[quote="crippled"]Just got a set of 16x8 MOABS in black from Quadratec, are they the Mopar or the Moab "style"? I'm interested because I am in the market for a set.



Thanks

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.
Top
 Profile  
 
crippled
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Fri May 16, 2014 5:54 pm 
Offline
LOST Member

Joined: Sun Feb 24, 2013 11:20 pm
Posts: 284
Moab style from the tj rubicon
Top
 Profile  
 
silverkk
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Fri May 16, 2014 11:16 pm 
Offline
LOST Junkie

Joined: Mon Feb 04, 2013 12:27 pm
Posts: 637
tjkj2002 wrote:
Stock is cone seat.Honda is one of the only ones I know of that uses ball seat.
agreed
Top
 Profile  
 
lazlo22
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Fri Sep 11, 2015 5:09 pm 
Offline
LOST Newbie
User avatar

Joined: Mon May 26, 2008 9:01 pm
Posts: 25
Location: Long Island NY
Just put on cragar soft 8's can I use the stock lug nuts?

Sent from my SAMSUNG-SM-G870A using Tapatalk

_________________
2008 KK Limited
Black, Sky Slider...
Cragar Series 397
BF AT KO2 -245/75/16
OEM 2.5"
JBA UCA
Top
 Profile  
 
tommudd
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Fri Sep 11, 2015 9:02 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Not Moabs since real MOABs are forged, the ones from Quadratrac are cast
but same lug nuts work
wish I would of known have one laying in the basement for cheap

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
KJ/toy
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Fri Sep 11, 2015 9:53 pm 
Offline
LOST Member

Joined: Fri Apr 08, 2011 3:21 pm
Posts: 251
Location: Chillicothe, Ohio
tommudd wrote:
Not Moabs since real MOABs are forged, the ones from Quadratrac are cast
but same lug nuts work
wish I would of known have one laying in the basement for cheap



Oh, you don't say....

_________________
________
06 Renegade, 265-70-16 Duratracs on Moab's/OMF, RL sliders ,roof rack, On board air, JBA-UCA, adjust-a strut, Rear-OME 948 two uppers ,Sensatrac shocks, Boiler rad. skid, Mopar/4x guard skid,Terra-flex 4:1,HD cooling,more lights, gauges. ARB/Warn, Mudds Rear Bumper.
Top
 Profile  
 
tommudd
 Post subject: Re: Cone or ball seat lug nuts?
PostPosted: Sat Sep 12, 2015 1:13 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
KJ/toy wrote:
tommudd wrote:
Not Moabs since real MOABs are forged, the ones from Quadratrac are cast
but same lug nuts work
wish I would of known have one laying in the basement for cheap



Oh, you don't say....


Brand spanking new, never had a tire on it, nothing wrong with it

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management