| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| At The Helm Goodies!!!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=83052 |
Page 1 of 2 |
| Author: | RenegadeKC [ Sat Sep 12, 2015 8:49 pm ] |
| Post subject: | At The Helm Goodies!!!! |
First off, Morgan, you make such an awesome product! Thank You so much for all the guidance and for putting up with me and all my questions! I ordered a winch bumper with the hoop, as well as the rock sliders! Bumper and Sliders are absolutely amazing!!! I used POR 15 on the Bumper (this junk is tough btw!) and just spray painted the rock sliders. Now, onto the pics!!!   
|
|
| Author: | At The Helm [ Sun Sep 13, 2015 12:12 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
Haha thanks Cole and no problem with the questions! Jeeps lookin good man, I like the matte black color 
|
|
| Author: | lazlo22 [ Sun Sep 13, 2015 1:05 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
Looks spectacular. |
|
| Author: | RenegadeKC [ Sun Sep 13, 2015 7:50 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
Speaking of questions....What are those wires/brackets/sensors/modules things on each side under the turn signals/side markers area? |
|
| Author: | At The Helm [ Sun Sep 13, 2015 5:54 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
 not ringing a bell... There are two wire harnesses under there for the signal and markers. Some KKs have a big steel cylinder behind the driver side crossmember which I think is an anode to help keep rust at bay.
|
|
| Author: | ajohns1288 [ Sun Sep 13, 2015 7:39 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
At The Helm wrote: :?: not ringing a bell... There are two wire harnesses under there for the signal and markers. Some KKs have a big steel cylinder behind the driver side crossmember which I think is an anode to help keep rust at bay. From the pics, it looks like the side marker harness. That metal thing is just a weight used as a mass damper. I think only the fulltime T-Cases get it. It's supposed to help with vibrations that might get transmitted through the frame. |
|
| Author: | ajdrummer [ Thu Sep 17, 2015 3:15 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
ATH bumpers are sooooo sexy I want one! |
|
| Author: | RenegadeKC [ Thu Sep 17, 2015 6:02 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
ajdrummer wrote: ATH bumpers are sooooo sexy I want one! Buy one! They're worth every penny!!! |
|
| Author: | flippy [ Thu Sep 17, 2015 10:30 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
What tires you got on there? And nice set up 
|
|
| Author: | Gageraid [ Fri Sep 18, 2015 7:22 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
That's one hell of a KK you have there. |
|
| Author: | RenegadeKC [ Fri Sep 18, 2015 10:27 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
flippy wrote: What tires you got on there? And nice set up They're Goodyear Wrangler Duratracs 245/75R16 on TJ Rubicon wheels |
|
| Author: | RenegadeKC [ Fri Sep 18, 2015 10:30 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
flippy wrote: What tires you got on there? And nice set up Thanks man! I'm looking into that 4.7L Throttle body. |
|
| Author: | Gageraid [ Fri Sep 18, 2015 11:15 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
RenegadeKC wrote: flippy wrote: What tires you got on there? And nice set up Thanks man! I'm looking into that 4.7L Throttle body. You should do it! I've been sporting that mod for quite some time now. |
|
| Author: | LKWJeeper [ Sun Sep 20, 2015 10:05 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
That's one nice looking KK. I really like the matte paint color. Sent from my iPad using Tapatalk HD |
|
| Author: | RenegadeKC [ Mon Sep 21, 2015 12:26 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
LKWJeeper wrote: That's one nice looking KK. I really like the matte paint color. Sent from my iPad using Tapatalk HD The matte black will be coming off the last week of November. We will be going in our natural color till May, when we will plastidip it again. No idea on the color though. Maybe camo green? |
|
| Author: | dj svacha [ Tue Sep 22, 2015 8:24 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
Are the tj rubies wheels set back? They look like what came on my artic. OK , did you cry when you started to cut the wheel wells for the bumper?  Like it a lot will be stealing your ideas.Thnx Dj |
|
| Author: | tommudd [ Wed Sep 23, 2015 8:16 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
dj svacha wrote: Are the tj rubies wheels set back? They look like what came on my artic. OK , did you cry when you started to cut the wheel wells for the bumper? Like it a lot will be stealing your ideas.Thnx Dj 2004-2006 Jeep Wrangler Rubicon wheels work ( they are the MOABs ) Only those years, back spacing is 5 inches, 8 inches wide if looking to run them stick with a 265-70-16, same height as the 245-75-16s but sit on the wheel much better 8 inch is really too wide for 95% of the tires people try and run on them on KJs and KKs |
|
| Author: | RenegadeKC [ Wed Sep 23, 2015 5:36 pm ] |
| Post subject: | Re: At The Helm Goodies!!!! |
tommudd wrote: dj svacha wrote: Are the tj rubies wheels set back? They look like what came on my artic. OK , did you cry when you started to cut the wheel wells for the bumper? Like it a lot will be stealing your ideas.Thnx Dj 2004-2006 Jeep Wrangler Rubicon wheels work ( they are the MOABs ) Only those years, back spacing is 5 inches, 8 inches wide if looking to run them stick with a 265-70-16, same height as the 245-75-16s but sit on the wheel much better 8 inch is really too wide for 95% of the tires people try and run on them on KJs and KKs For reference, a 265/70r16 is a hair under 10.5" wide. The 245/75r16 is a hair over 9.5" wide. Won't the 03 Rubi wheels work as well? dj svacha - as far as cutting the fenders....yes, I was VERY hesitant, however, the wife told me to grow a pair, so I started cutting, haha. |
|
| Author: | Bmxer524 [ Thu Sep 24, 2015 2:56 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
Yes they will. As long as they are 16x8 and came off a TJ Rubicon, they will work. |
|
| Author: | tommudd [ Thu Sep 24, 2015 7:52 am ] |
| Post subject: | Re: At The Helm Goodies!!!! |
RenegadeKC wrote: tommudd wrote: dj svacha wrote: Are the tj rubies wheels set back? They look like what came on my artic. OK , did you cry when you started to cut the wheel wells for the bumper? Like it a lot will be stealing your ideas.Thnx Dj 2004-2006 Jeep Wrangler Rubicon wheels work ( they are the MOABs ) Only those years, back spacing is 5 inches, 8 inches wide if looking to run them stick with a 265-70-16, same height as the 245-75-16s but sit on the wheel much better 8 inch is really too wide for 95% of the tires people try and run on them on KJs and KKs For reference, a 265/70r16 is a hair under 10.5" wide. The 245/75r16 is a hair over 9.5" wide. Won't the 03 Rubi wheels work as well? dj svacha - as far as cutting the fenders....yes, I was VERY hesitant, however, the wife told me to grow a pair, so I started cutting, haha. WITH PROPER LIFT AND WHEELS/ TIRES NO NEED TO CUT  Yes 2003 will work, typo plus lots more 2004-2006 were made although the 2006 Moabs are different than 03-05s |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|