so I bought my 2008 jeep liberty kk 6 months ago and have always wanted to add some extra lighting. I bought a 20 inch light bar and wanted to mount it on the bumper but found out its not really possible so I wanted to get a bull bar. I couldn't afford a new ne for $300 but bought on for $50 at a yard sale. the problem Is it doesn't have a brand name and I don't know how to install it. it was made for a sierra/Silverado which isn't the problem. I am a welder at a steel shop so I can fab some brackets without a problem but I am having trouble finding an attachment point. as far as I can see there are no stock tow hooks/ tow hooks holes. so does anybody out there have a picture of the correct brackets or a write up of how to install one with the correct brackets that I could copy?

Up behind the front bumper on the frame are 2 holes per side which you can use to mount it.
This will give you an idea.
viewtopic.php?f=34&t=82189
Here is more detail.
viewtopic.php?f=104&t=80162

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!

you are a godsend. I'm new to Lost jeeps, I already love this site

Glad to help out where I can.
Remember Pics or it didn't happen!

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!