From the 08 FSM:
(Posted by JeepCares on Jeepforum.com)
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Banjo Bolt torque http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=83765 |
Page 1 of 1 |
| Author: | CCowen [ Fri Jan 01, 2016 8:04 pm ] |
| Post subject: | Banjo Bolt torque |
Hi everyone. Had a rear driver sticking caliper. I can't find the banjo bolt torque anywhere. Does anyone know the torque spec for that and for the mounting bracket bolts. Please help Sent from my HTC One using Tapatalk |
|
| Author: | Scar0 [ Sat Jan 02, 2016 6:34 am ] |
| Post subject: | Re: Banjo Bolt torque |
Banjo bolt 31 N·m (23 ft. lbs) Caliper mounting bolts 37 N·m (28 ft. lbs.) These are not the caliper adapter mounting bolts 135 N·m (100 ft.lbs). Which are closer together and closer to the axle. |
|
| Author: | CCowen [ Sat Jan 02, 2016 9:17 am ] |
| Post subject: | Re: Banjo Bolt torque |
Thanks. That's exactly what I was looking for. Thanks again Sent from my HTC One using Tapatalk |
|
| Author: | Scar0 [ Sat Jan 02, 2016 12:52 pm ] |
| Post subject: | Re: Banjo Bolt torque |
Your welcome. |
|
| Author: | lfhoward [ Sat Jan 02, 2016 1:55 pm ] |
| Post subject: | Re: Banjo Bolt torque |
From the 08 FSM: (Posted by JeepCares on Jeepforum.com) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|