It is currently Thu Mar 28, 2024 10:00 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: 2012 KK IGNITION COIL WIRING DIAGRAM - resolved
PostPosted: Sun Jun 12, 2016 12:55 pm 
Offline
LOST Newbie

Joined: Tue May 31, 2016 1:38 pm
Posts: 4
2012 JEEP KK DOWN -- Need Ignition coil to spark plug wiring schematic ASAP - 2012 model Only

I had a mobile mechanic change out my 2012 KK ignition coils and plugs yesterday and the idiot did not map out which ignition cables went to which plugs on the other side of the block. CAN ANYONE PLEASE PROVIDE THE WIRING SCHEMATIC OR POINT TO POINT CONNECTIONS FROM THE 3 DRIVER SIDE IGNITION COILS TO THE 3 PASS SIDE PLUGS? NOTE: THIS IS A 2012 KK WITH ONLY 3 COILS ON THE DRIVER SIDE and 3 WIRE OUTPUTS OVER TO THE PASS SIDE OF BLOCK. Unfortunately all three spark plug cables can reach from any driver side coil to any pass side plug : ( so no way to know which goes to which because of idiot mechanic. I have tried every site I can think of but cannot find the connection schematic from coil to plug....

This mechanic also over torqued one of the new coils and snapped off the threads of the 10mm 'hold down' bolt so it is no longer holds the coil down. There is only 1 ½ threads left on end of bolt.... Any idea how to remove the threads left in the coil mounting hole??? I thinking I may be able to just tap a larger thread in the opening and use a larger bolt with lock washer if there is no easy way to remove broken thread? Thoughts?

Any help would be very much appreciated. As of now my jeep is down until I can resolve the coil to plug wiring issue. I think if I can get the correct wiring then I should be able to at least drive it to shop with the loose coil...


Last edited by JAJABA64 on Sun Jun 12, 2016 6:56 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: 2012 KK IGNITION COIL WIRING DIAGRAM - URGENT VEHICLE DO
PostPosted: Sun Jun 12, 2016 6:37 pm 
Offline
LOST Newbie

Joined: Mon Apr 04, 2016 11:32 pm
Posts: 15
Here is how my 2012 goes,
6........5
4........3
2........1

1 goes to 4
3 goes to 6
5 goes to 2

_________________
2012 Liberty Sport 4x4, OME 1'5" lift,
2008 Liberty Limited 4x4, OME 1.5" lift, 265/60r18 Duratracs
1994 S10 4x4, 3" body lift, 31x10.50


Top
 Profile  
 
 Post subject: Re: 2012 KK IGNITION COIL WIRING DIAGRAM - URGENT VEHICLE DO
PostPosted: Sun Jun 12, 2016 6:48 pm 
Offline
LOST Newbie

Joined: Tue May 31, 2016 1:38 pm
Posts: 4
:BANANA: :pepper: :BINGO: Thanks! That did the trick.... Up and running now... FWIW: New Iridium TT plugs and denso coils have my 2012 liberty running and idling significantly smoother and quieter (had 35K on stock coils/ plugs)... Waiting until tomorrow to go to dealer about the 10mm coil bolt that the mechanic shear off in mounting hole... Will post update afterwords


Top
 Profile  
 
 Post subject: Re: 2012 KK IGNITION COIL WIRING DIAGRAM - resolved
PostPosted: Sat Dec 15, 2018 11:18 pm 
Offline
LOST Newbie

Joined: Sat Dec 08, 2018 9:55 am
Posts: 1
very helpfull and appreciated

kk 2013


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com