It is currently Tue Apr 16, 2024 1:58 am

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
Ihapy2bnapy
 Post subject: 4.56 gears on the kk.. what did you get?
PostPosted: Thu Feb 02, 2017 11:21 pm 
Offline
LOST Newbie

Joined: Sun Jun 12, 2016 10:31 pm
Posts: 73
Location: central texas
So I'm finally ready to re-gear, mainly to run 33s I'm going with 4.56 however id like to know the different routes anyone has tried as far as brands and ratio to wheel size. ? Also when ordering parts does it matter to get the Chrysler 8.25 with 27spline? Or the later 29? :dizzy:
Any info Would be greatly appreciated!!! :-)r

_________________
2012 black kk , ome custom 3" lift , Al's A arms, adjustable end links w quick disconect front and rear, tranny cooler, external fan w switch, custom roof rack, rear spartan locker
Top
 Profile  
 
Homeward_Bound
 Post subject: Re: 4.56 gears on the kk.. what did you get?
PostPosted: Fri Feb 03, 2017 12:40 am 
Offline
LOST Newbie
User avatar

Joined: Tue Aug 26, 2014 10:56 pm
Posts: 70
Location: NYC
In my research for gears to with my 32's, I went with Yukon after many reviews favored them. According to the shop where I got my gears done, apparently Revolution Gear is made in the same factory in Korea. However, they have looser tolerances in comparison.

_________________
The sea is a cruel mistress.

2012 Liberty Latitude 4x4
MOPAR Skids
ATH Front Recovery System, Roof Rack, Rock Rails, and Rear Bumper with Carrier
JBA 4" Lift
4.56 Yukon, Eaton-E Front Locker
255/75R17 Duratracs on Rubicon Wheels
Image
Top
 Profile  
 
Ihapy2bnapy
 Post subject: Re: 4.56 gears on the kk.. what did you get?
PostPosted: Fri Feb 03, 2017 10:44 am 
Offline
LOST Newbie

Joined: Sun Jun 12, 2016 10:31 pm
Posts: 73
Location: central texas
Oh OK. I was considering USA standard and yukon like you mentioned. Now Will the gears that work on the KJ work also on the KK? I know they have the same 8 1/4 axle. But the websites don't give me options for the KK


Sent from my iPhone using Tapatalk

_________________
2012 black kk , ome custom 3" lift , Al's A arms, adjustable end links w quick disconect front and rear, tranny cooler, external fan w switch, custom roof rack, rear spartan locker
Top
 Profile  
 
tommudd
 Post subject: Re: 4.56 gears on the kk.. what did you get?
PostPosted: Fri Feb 03, 2017 10:55 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Ihapy2bnapy wrote:
Oh OK. I was considering USA standard and yukon like you mentioned. Now Will the gears that work on the KJ work also on the KK? I know they have the same 8 1/4 axle. But the websites don't give me options for the KK


Sent from my iPhone using Tapatalk


Yes same for the KJ and KK on the rear gears

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » KK Discussion---2008-2012 Liberty/Cherokee Models

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management