Rear Track Bar Leaning My Lifted KK???

JeepMonkey190 · **Posted:** Sat Jun 17, 2017 10:01 pm

Since i lifted my KK a while back I never made a new longer track bar for the rear and the jeep has some pretty intense leaning to the driver side, so my question would be to you experts is it possible that the stock length track bar could be pulling the jeep down on the driver side???

tjkj2002 · **Posted:** Sat Jun 17, 2017 10:41 pm

No but it will pull the rear axle off center and make the L/R wheel stick out father then the R/R.

JeepMonkey190 · **Posted:** Sat Jun 17, 2017 11:21 pm

tjkj2002 wrote:

No but it will pull the rear axle off center and make the L/R wheel stick out father then the R/R.

Dang, then I'm back to square one with the jeep lean. Is it worth building a new one since I have the 3.5 econo lift?

lfhoward · **Posted:** Sat Jun 17, 2017 11:46 pm

You could slap an extra iso on that side to get it back up to even height (unless you already have two extra, in which case maybe delete one from the other side).

JeepMonkey190 · **Posted:** Sun Jun 18, 2017 12:57 am

lfhoward wrote:

You could slap an extra iso on that side to get it back up to even height (unless you already have two extra, in which case maybe delete one from the other side).

already have 2 on the rear driver side.

KK Renegade · **Posted:** Sun Jun 18, 2017 7:35 am

Might help solve prob
http://jeepinbyal.com/liberty-2008-2012 ... t-kit.html

JeepMonkey190 · **Posted:** Sun Jun 18, 2017 12:30 pm

KK Renegade wrote:

Might help solve prob
http://jeepinbyal.com/liberty-2008-2012 ... t-kit.html

If I do it I am going to make my own, but thanks for the link. I just dont feel like paying almost $400 for it if I can make it myself for less than half that price.

I just dont know if its going to do anything useful to put in a custom longer one at this point.

tommudd · **Posted:** Mon Jun 19, 2017 11:51 am

JeepMonkey190 wrote:

KK Renegade wrote:

Might help solve prob
http://jeepinbyal.com/liberty-2008-2012 ... t-kit.html

If I do it I am going to make my own, but thanks for the link. I just dont feel like paying almost $400 for it if I can make it myself for less than half that price.

I just dont know if its going to do anything useful to put in a custom longer one at this point.

At 3.5 inches of lift,......yes it will ( or should )
I would always replace the rear track bar on any KK that was being lifted
plus extend the sway bar links
then go from there

JeepMonkey190 · **Posted:** Mon Jun 19, 2017 5:07 pm

If I do it I am going to make my own, but thanks for the link. I just dont feel like paying almost $400 for it if I can make it myself for less than half that price.

I just dont know if its going to do anything useful to put in a custom longer one at this point.[/quote]
At 3.5 inches of lift,......yes it will ( or should )
I would always replace the rear track bar on any KK that was being lifted
plus extend the sway bar links
then go from there[/quote]

Ok then I will try there first,

Thanks tom

TIJKK1220 · **Posted:** Fri Jun 23, 2017 9:32 am

JeepMonkey190 wrote:

If I do it I am going to make my own, but thanks for the link. I just dont feel like paying almost $400 for it if I can make it myself for less than half that price.

I just dont know if its going to do anything useful to put in a custom longer one at this point.

At 3.5 inches of lift,......yes it will ( or should )
I would always replace the rear track bar on any KK that was being lifted
plus extend the sway bar links
then go from there[/quote]

Ok then I will try there first,

Thanks tom[/quote]

Sent you a message. I might be of some assistance.

KKnut · **Posted:** Sun Jun 25, 2017 10:52 am

This one is $167 + delivery.

http://www.performancesuspension.com.au ... 012-p.html

Sent from my iPhone using Tapatalk

Rear Track Bar Leaning My Lifted KK???

Who is online