I think I am going to get these springs, shocks etc..
What other items would you recommend to order with them. I would like to level front as front looks nose dived with OEM springs.
And if you can recommend a place to buy from, and which spring shocks for HD, if allowed or pm me.
I have 81000 miles on it right now, and its showing its age in suspension leaning and bouncing.

First how much lift do you want ?
2.5 inches over new stock height is easy with OME 927 front springs and 731 rear springs
gives honest 2.5 inches of lift
add Bilstein front and rear shocks with Teraflex front bumpstops and two hockey pucks per side bolted down to the rear spring perch
OR
if you have the extra coin, the JBA adjustable coilover can not be beat as far as ride and handling available in 2.5 or 4 inches
of course www.jeepinbyal.com for all of your lift needs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

2.5 inches is fine. What will the Terafelx bump stops and two hockey pucks do? Are they required to install the springs and shocks?

Bumpstops are well, bumpstops keep the shocks from over compressing and blowing them out so yes required

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

What Bilsteins shock part numbers front and rear. I just read on another thread, that the OME L shocks arent available anymore or are at least not being produced.