LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
265/70r16 tire and looking for wheels, can I run a 0 offset? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=87460 |
Page 1 of 1 |
Author: | jeepnick6 [ Wed Nov 22, 2017 4:35 pm ] |
Post subject: | 265/70r16 tire and looking for wheels, can I run a 0 offset? |
Looking for a little but of advice. Im currently lifting my 2012 KK Limited 4x4 2.5 in and going to run 265/70r16 tires. Looking for wheels and wondering if I can run a 16x8 wheel with 0 offset witt no rub or spacers needed. Do I need to stay within the stock range of offset or can I run a 0 offset with no issues. Any help is greatly appreciated. |
Author: | Bmxer524 [ Thu Nov 23, 2017 3:32 am ] |
Post subject: | Re: 265/70r16 tire and looking for wheels, can I run a 0 off |
Honestly might rub. 265/70-16s tend to rub on the pinchwelds with less than 3” of lift. Pushing the tires out a little most likely won’t help. It’ll look great though (at least in my opinion, I like the wide stance). |
Author: | tommudd [ Thu Nov 23, 2017 9:46 am ] |
Post subject: | Re: 265/70r16 tire and looking for wheels, can I run a 0 off |
8 inch wide go 5 inches of backspacing 7 inches wide go with 4 inches of backspacing Less chances of rubbing when turning and LOOKS way better than hanging out |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |