Hello All,
When I activate my rear window washer, I can hear the pump running but no fluid sprays out. I've tried clearing the rear nozzle with a piece of wire. Still no spray. The front washer works properly (both nozzles) so I'm guessing the rear tubing might be blocked.
How do I access and clear it? Is the rear washer connected to a separate pump?
Thanks for all suggestions.

Whats your washer fluid like? Mine does that when my fluids getting low...

Sent from my SM-G920W8 using Tapatalk

Both front and rear use the same pump. You will have to remove the hatch interior trim to get to the hose on the brake light. There are 2 screws in the grab handles, then the rest is clipped in. The washer hose is built into the headliner. So you can not remove it from the rig.

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!