LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

ARB old man emu 2731 springs
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=87579		 Page 1 of 1
Author:  JAVITAVI91 [ Thu Dec 21, 2017 4:22 pm ]
Post subject:  ARB old man emu 2731 springs
Wsup guys I need help in making a decision wen buying these springs ARB OME 2731 for a 1.5” lift on my 2012 Jeep Liberty. Has anyone bought these springs for their Jeep and if so how is the ride handeling pro and cons. I am also trying to pare them with some bilstein shocks for a 2.5 lift from JBA.
Author:  tommudd [ Fri Dec 22, 2017 10:14 am ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
Wsup guys I need help in making a decision wen buying these springs ARB OME 2731 for a 1.5” lift on my 2012 Jeep Liberty. Has anyone bought these springs for their Jeep and if so how is the ride handeling pro and cons. I am also trying to pare them with some bilstein shocks for a 2.5 lift from JBA.


many have, whats the main question?
No cons , only pros with them, will give you 2.5 inches of lift
Running 927s in front ? hopefully...
Author:  JAVITAVI91 [ Mon Jan 01, 2018 9:36 pm ]
Post subject:  Re: ARB old man emu 2731 springs
So I bought them already I’m just waiting for them to arrive. Now for the front I got the OME 2927 with bilstein B6 4600 I should be good with that right. What would be the max tire size I can use without issues I have 16 inch rims with a 4.5 backspace.
Author:  JAVITAVI91 [ Mon Jan 01, 2018 10:01 pm ]
Post subject:  Re: ARB old man emu 2731 springs
So I just read the 08-12 Jeep lift facts I think this all answered all my questions
Author:  JAVITAVI91 [ Mon Jan 01, 2018 10:38 pm ]
Post subject:  Re: ARB old man emu 2731 springs
So I just read the 08-12 Jeep lift facts I think this all answered all my questions. So my other quiestion is how much lift should I expect with the OME 2927 and 2731 with front bilstein 4600 and the 33-185552..?
Author:  tommudd [ Tue Jan 02, 2018 2:54 pm ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
So I bought them already I’m just waiting for them to arrive. Now for the front I got the OME 2927 with bilstein B6 4600 I should be good with that right. What would be the max tire size I can use without issues I have 16 inch rims with a 4.5 backspace.



with 2.5 inches of lift 245-75-16s 0r 265-70-16s ( same height )
Any larger you'll want to regear , even with that size I run 4.10 gearing to compensate for loss of mileage and power
Author:  tommudd [ Tue Jan 02, 2018 2:56 pm ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
So I just read the 08-12 Jeep lift facts I think this all answered all my questions. So my other quiestion is how much lift should I expect with the OME 2927 and 2731 with front bilstein 4600 and the 33-185552..?

2.5 inches of lift, springs give lift so no difference what shocks you run, shocks control bounce , nothing more
Author:  JAVITAVI91 [ Tue Jan 02, 2018 3:31 pm ]
Post subject:  Re: ARB old man emu 2731 springs
Wen you say re gear do you mean also the front diff as well or just the rear ?
Author:  lfhoward [ Tue Jan 02, 2018 8:53 pm ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
Wen you say re gear do you mean also the front diff as well or just the rear ?

If regearing, both diffs must be identical in order to use 4 wheel drive. Otherwise the front wheels would try to turn at different speeds than the rear wheels and it would blow up the transfer case.
Author:  JAVITAVI91 [ Tue Jan 02, 2018 10:21 pm ]
Post subject:  Re: ARB old man emu 2731 springs
“Ifhoward” since your running 245/75/16 on your Liberty how is the turning. Did you also te heard your diff ?
Author:  lfhoward [ Wed Jan 03, 2018 1:30 am ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
“Ifhoward” since your running 245/75/16 on your Liberty how is the turning. Did you also te heard your diff ?

Turning has always been fine wth no rub, but I do have the 4” JBA kit. However you should be fine with this tire size at 2.5” and certainly at 3”. I have wanted to regear to 4.10’s but haven’t had the $$$ to do that yet. You will lose some power and your mpg will suffer some, but it’s still reasonable to drive with the 245/75/16 using stock gears. If you had 265/75/16 then you would absolutely need to regear, but you couldn’t run that large of a tire on a 2.5” lift anyway. I keep an eye on my transmission temperature using a Scangauge II and installed an auxiliary cooling fan so I am sure I’m not overheating my transmission when I’m off-road or towing.
Author:  JAVITAVI91 [ Wed Jan 03, 2018 2:42 am ]
Post subject:  Re: ARB old man emu 2731 springs
Ok cool that’s good to know. Were did you buy your cooling fan if you could recommend me one ? I was thinking of that too overheating the trans.
Author:  lfhoward [ Wed Jan 03, 2018 10:11 am ]
Post subject:  Re: ARB old man emu 2731 springs
All KK's come with an electric radiator fan, but the tow package adds a secondary mechanical fan with a fan clutch. This fan is a back-up to the electronic one and can keep the radiator much cooler when the Jeep is working hard. This will be an asset when towing, climbing up mountains, or wheeling on a hot day. The radiator itself is the same in tow and non-tow package KK's, and the fan shroud is already there.

Image

2008-2012 Mechanical Cooling Fan (#1 in diagram): 55116884AA
http://www.moparpartsamerica.com/parts/ ... eid=214583

2008-2012 Fan Clutch (#2 in diagram): 52079718AD
http://www.moparpartsamerica.com/parts/ ... eid=214583

4 oem bolts needed for fastening the fan to the fan clutch:
http://www.factorychryslerparts.com/pro ... 34860.html
Author:  JAVITAVI91 [ Wed Jan 03, 2018 11:24 am ]
Post subject:  Re: ARB old man emu 2731 springs
So this is a direct fit ? Is there a conector also ?
Author:  lfhoward [ Wed Jan 03, 2018 4:44 pm ]
Post subject:  Re: ARB old man emu 2731 springs
It is a direct fit, on the water pump shaft at the front of the engine. If your Jeep has the factory tow package, then it will already have this fan. If not, it can be added. See this thread for more info: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=104&t=76451
Author:  JAVITAVI91 [ Thu Jan 04, 2018 6:33 pm ]
Post subject:  Re: ARB old man emu 2731 springs
So on my Liberty I’m using the OME 2731 and the bilstein shocks 33-185552. Were can i get the bushings inserts besides the ones from JBA off-road ?
Author:  tommudd [ Thu Jan 04, 2018 10:05 pm ]
Post subject:  Re: ARB old man emu 2731 springs
JAVITAVI91 wrote:
So on my Liberty I’m using the OME 2731 and the bilstein shocks 33-185552. Were can i get the bushings inserts besides the ones from JBA off-road ?


JBA is it
Author:  JAVITAVI91 [ Fri Jan 05, 2018 12:31 am ]
Post subject:  Re: ARB old man emu 2731 springs
Wsup guys thanks for answering all my questions I apresúrate the help
I know it’s 4 days late but HAPPY NEW YEARS.

Before I buy my rear shocks I want to make sure I get the right ones. Here’s a link from eBay. Let me know if these are the right ones

https://m.ebay.com/itm/BILSTEIN-33-1855 ... =112599184
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/